3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Anybody ever use CX Terminator XP Select Carbon Shafts?  (Read 154 times)

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Anybody ever use CX Terminator XP Select Carbon Shafts?
« on: February 12, 2012, 11:42:00 AM »
I found a decent deal on these CX Terminator Select shafts, but couldn't find a great deal of info on them. I'm assuming that it's a dis-continued shaft from Carbon Express? So with little info to go on except the GPI and outside diameter I thought I'd ask the guys on TG where I have access to the largest knowledge base to trad archery known to mankind.

One more thing, I just bought some 50gr. brass inserts from Braveheart archery that fit the standard Carbon Express and Gold Tip arrow shafts and was wondering if these would fit the CX Terminator shafts that I'm eyeballing?
For some reason the manufacturers only give the OD and not the ID dimensions on their shafting.

Thanks for any help.

~SEMO~
~Varitas Vos Liberabit~ John 8:32

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #1 on: February 12, 2012, 12:42:00 PM »
You can use the same inserts as your Gold Tips and standard Carbon Express.They have a straighter tolerence then like their Predator II line.A Terminator 45/60 has a .400 spine and the 60/75 has a .342 spine.I had some Terminator 45/60,they shot great for the bow I had them for,they are like GT 55/75 spine wise.

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #2 on: February 12, 2012, 05:52:00 PM »
Thanks JR, sounds like a nice shaft. I used Stu's calculator to run the numbers on them and they should work perfect for both my recurve and my longbow, only difference is I need to take 1" off the total length for the recurve. This way I can buy a dozen and have half for my recurve and the other half for my longbow.
~Varitas Vos Liberabit~ John 8:32

Offline BWD

  • Trad Bowhunter
  • **
  • Posts: 1550
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #3 on: February 12, 2012, 07:07:00 PM »
They are good shafts, just not as dolled up as some shafts are today.
"If I had tried a little harder and practiced a little more, by now I could have been average"...Me

Offline Outwest

  • Trad Bowhunter
  • **
  • Posts: 663
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #4 on: February 12, 2012, 07:26:00 PM »
I've got a dozen and they shoot very well and seem to be a tough arrow. 31" 60/75 out of my 55# bows.

John

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #5 on: February 12, 2012, 08:24:00 PM »
I bought a dozen of these & a dozen Easton Lightspeeds for my first ever US hunting trip. Broke every single Terminator I shot. If memory serves, I believe I took 2 home with me. The Eastons held up just fine.
I swear I've never shot a more fragile shaft. Unless they're almost free, I'd use the money for better shafts.
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline kat

  • Trad Bowhunter
  • **
  • Posts: 1413
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #6 on: February 13, 2012, 09:09:00 AM »
I shoot the 45/60 shafts and love them. I have been shooting them for years, and have found them to be one of the toughest arrows I have ever shot.
Robtatto, maybe you just got a bad run.
They are very good shafts. They are so tough that I use them for my stumping arrows.
When footed, they are just about bomb proof.
You probably got a good price on them, because I don't believe CE makes them anymore.
Ken Thornhill

Offline curlis

  • Trad Bowhunter
  • **
  • Posts: 1033
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #7 on: February 13, 2012, 11:50:00 AM »
I have shot them for years. They are a great shaft. I'm really sad to see them discontinued. You won't be dissapointed with them.
Pick a spot and concentrate!

Offline SEMO_HUNTER

  • Trad Bowhunter
  • **
  • Posts: 2792
Re: Anybody ever use CX Terminator XP Select Carbon Shafts?
« Reply #8 on: February 13, 2012, 12:21:00 PM »
Thanks for all the input guys, I'm thinking seriously about giving them a shot.......pun intended.   :thumbsup:
~Varitas Vos Liberabit~ John 8:32

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©