3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)  (Read 911 times)

Offline WJackson11x

  • Trad Bowhunter
  • **
  • Posts: 173
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #40 on: February 16, 2012, 07:30:00 PM »
Due to the weather today (rain) I was unable to shoot.  Gonna shoot some tomorrow and see what I come up with.
Wes Jackson

Black Bear 40# @28 60"
1971 Grizzly 45# @ 28 58"

Offline WJackson11x

  • Trad Bowhunter
  • **
  • Posts: 173
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #41 on: February 18, 2012, 07:42:00 PM »
Update-- I went out today and decided to shoot my broadheads (Woodsman 125gr-3blade). Arrows flew perfect and broadheads/fieldpoints hit in same spot.  Such a relief that tuning is over.  I set my bareshafts where they would fly the best(still nock high) as many suggested.  Here is a pic. Shots were at 20 yds and for me , this is a pretty good group.  The one arrow to the left was a shot that I felt a bad release.  Thanks for everyone's help and suggestions. Just for reference, my nockpoint ended up at 1/2" and braceheight is at 7 1/2". The vey top arrow and the far left arrow are the broadheads.

 
Wes Jackson

Black Bear 40# @28 60"
1971 Grizzly 45# @ 28 58"

Offline Rustic

  • Trad Bowhunter
  • **
  • Posts: 645
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #42 on: February 18, 2012, 08:24:00 PM »
"I need some help. This has been a nightmare trying to tune my 45#@28 Grizzly..."

Hi Wes,

Today I'm having the same problem. I have the same bow as you but my draw is 28" and I have full length GT5575s spined @.400. I've gone up and down with point weights. Nock is still too high. Not much side to side deviation.  
Now I'm fletching one arrow and I will adjust my point weights with a 3X4" feathered shaft, right helical.
Without reading the other posts, heres my point:
- Start looking at every aspect of your set up and make one adjustment at a time.
- Relax, its a sport, not a job. hings will work out for you.
Just MHO.

Regards....  :thumbsup:
Bear Montana Long Bow 50#@28"
PV Longbow 48#@28"
Bear Grizzly Recurve 45#@28"
Darton Trailmaster Recurve 35#@28"

Offline JamesKerr

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3575
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #43 on: February 18, 2012, 10:28:00 PM »
I would definately say that you are in tune.
James Kerr

Offline WJackson11x

  • Trad Bowhunter
  • **
  • Posts: 173
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #44 on: February 19, 2012, 12:41:00 PM »
It's an awesome thing watching a broadhead tipped arrow fly straight and effortlessly toward the target and hit where you're aiming.  Thanks again for everyone's help.
Wes Jackson

Black Bear 40# @28 60"
1971 Grizzly 45# @ 28 58"

Offline momo

  • Trad Bowhunter
  • **
  • Posts: 25
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #45 on: February 19, 2012, 02:16:00 PM »
you can also nock to high where arrow bumps off shelf i would try to paper tune but it hard to get a ggod release for perfect flight. i would play with it til i get my best grouping .you can try a release ad to get good paper tear then go back to finger and paper tune at ddifferent yardages
vern thompson

Offline WJackson11x

  • Trad Bowhunter
  • **
  • Posts: 173
Re: Need Help! Can't get rid of nock high--Bareshafting (UPDATE)
« Reply #46 on: February 19, 2012, 02:48:00 PM »
Quote
Originally posted by momo:
you can also nock to high where arrow bumps off shelf i would try to paper tune but it hard to get a ggod release for perfect flight. i would play with it til i get my best grouping .you can try a release ad to get good paper tear then go back to finger and paper tune at ddifferent yardages
Momo, If you'll read the entire post, You'll see what my conclusions were.  I ended up at 1/2' nock high and around 7 1/2" braceheight.  Broadheads fly perfect.
Wes Jackson

Black Bear 40# @28 60"
1971 Grizzly 45# @ 28 58"

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©