3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: KME knife sharpening and Grizzly broadheads???  (Read 220 times)

Offline collofthewild

  • Trad Bowhunter
  • **
  • Posts: 138
KME knife sharpening and Grizzly broadheads???
« on: February 27, 2012, 10:25:00 AM »
I'm torn between two products from KME..... the knife sharpening system or the broadhead system.  

I like the versatility of the knife system, but my question is... can it do the grunt work that is needed to sharpen a reluctant head like a Grizzly??

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: KME knife sharpening and Grizzly broadheads???
« Reply #1 on: February 27, 2012, 10:38:00 AM »
Yes,it definitely can.

Offline 68_super_k

  • Trad Bowhunter
  • **
  • Posts: 26
Re: KME knife sharpening and Grizzly broadheads???
« Reply #2 on: February 27, 2012, 11:39:00 AM »
yeah the knife sharpener is the way to go

Offline Dodger

  • Trad Bowhunter
  • **
  • Posts: 271
Re: KME knife sharpening and Grizzly broadheads???
« Reply #3 on: February 27, 2012, 11:47:00 AM »
I have both systems but prefer the BH sharpner as I hone on 3M Wet Or Dry. However, the knife sharpner will tackle the Grizzly's as well. I checked to see if there was any ferrule interference and there was none. I am refering to the new batch of Grizzlys.

If you are ordering the knife jig that comes with stones, I would highly recommend that you also buy the Xtra Coarse Aluminium Oxide stones from Ron.

It is more or less the same colour as the Coarse Aluminium Oxide stone (brown). However, you can tell the difference by feel or you could mark the sides of each stone as shown in the pic.

 

Online frassettor

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4634
Re: KME knife sharpening and Grizzly broadheads???
« Reply #4 on: February 27, 2012, 12:06:00 PM »
I sharpen my grizzlys with the knife sharpner
"Everything's fine,just fine". Dad

Offline collofthewild

  • Trad Bowhunter
  • **
  • Posts: 138
Re: KME knife sharpening and Grizzly broadheads???
« Reply #5 on: February 27, 2012, 12:33:00 PM »
Thanks for all the info....

Dodger, thank you for the recommendation on the Xtra course stone.  

My decision is made, im ordering the knife system  :)


Not a place like tradgang anywhere, its nice to find all these people with the same passions.

Offline Dodger

  • Trad Bowhunter
  • **
  • Posts: 271
Re: KME knife sharpening and Grizzly broadheads???
« Reply #6 on: February 27, 2012, 01:05:00 PM »
My pleasure, Ross.

Just so there is no confusion, the knife kit comes with an Xtra Coarse Silicon Carbide stone (grey in colour and not shown in the above pic). What I am recommending is an Xtra Coarse Aluminium Oxide stone as well. This is extra.

Two other stones you may want to consider are a DMT coarse diamond stone to work on really dull edges or for re-profiling an edge (use VERY light strokes). The other stone could either be a Black Hard Arkansas stone (about 3000 grit) or a Translucent Hard Arkansas stone. Ron does not think these are really necessary but some people like a more polished edge. Infact you will have an excellent edge after honing with the medium aluminium oxide stone and do not really need to use the fine, white coloured, hard Arkansas stone that comes with the kit.

Offline sweeney3

  • Trad Bowhunter
  • **
  • Posts: 882
Re: KME knife sharpening and Grizzly broadheads???
« Reply #7 on: February 27, 2012, 07:21:00 PM »
You'll be pleased to see if you haven't gotten them already that the new Grizzlies aren't that reluctant.  They touch up relativly quickly.
Silence is golden.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©