3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: tab trimming advice?  (Read 357 times)

Offline bowgy

  • Trad Bowhunter
  • **
  • Posts: 79
tab trimming advice?
« on: May 10, 2012, 02:31:00 PM »
I just started using a tab and really like it.  I can feel my anchor better get a clean release and have improved my accuracy.  I've noticed though that the bow which was really quiet with a glove is is loud now.  I'm thinking I might need to trim the tab near my ring finger but don't want to ruin it.  Does anyone have any advice on trimming the tab?  I read an article that said trim it to where the string leaves the leather but I don't know where that is.

Offline Alexander Traditional

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3696
Re: tab trimming advice?
« Reply #1 on: May 10, 2012, 02:39:00 PM »
I just starting cutting back a little at a time,and tried to keep the original contour as best as possible. I ended up cutting off quite a bit off of mine. You can tell where the string is contacting the tab and I just starting cutting back to there and still leaving enough for my fingers to still have a little contact.

Offline CEO

  • Trad Bowhunter
  • **
  • Posts: 123
Re: tab trimming advice?
« Reply #2 on: May 10, 2012, 03:05:00 PM »
Put baby powder on tab to see where string wears; then trim accordingly.

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: tab trimming advice?
« Reply #3 on: May 10, 2012, 03:29:00 PM »
Quote
Originally posted by CEO:
Put baby powder on tab to see where string wears; then trim accordingly.
I agree. This is an old trick from many decades past.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline Stripstrike1

  • Trad Bowhunter
  • **
  • Posts: 298
Re: tab trimming advice?
« Reply #4 on: May 10, 2012, 03:31:00 PM »
Ahhhh!  Very good advice.
"I wish someone would have introduced me to this sport 20 years ago."

Offline Breeze430

  • Trad Bowhunter
  • **
  • Posts: 76
Re: tab trimming advice?
« Reply #5 on: May 10, 2012, 03:39:00 PM »
More old time advice...don't jump to conclusions..take your time with this..you may ruin a perfectly good tab. Speaking from experience.
Breeze
"Texas has yet to learn submission to any oppression, come from what source it may.”

Online Tall Paul

  • Trad Bowhunter
  • **
  • Posts: 545
Re: tab trimming advice?
« Reply #6 on: May 10, 2012, 03:43:00 PM »
Quote
Originally posted by bowgy:
I'm thinking I might need to trim the tab near my ring finger but don't want to ruin it.
Do you mean trim the tab height?  As in top to bottom, instead of the length (left to right)?
Is a life of rice cakes really life, or just passing time?-Rick Bragg

Offline bowgy

  • Trad Bowhunter
  • **
  • Posts: 79
Re: tab trimming advice?
« Reply #7 on: May 10, 2012, 04:50:00 PM »
Tall Paul,  I'm not really sure.   It does extend a bit below my ring finger as in up and down.

Online Tall Paul

  • Trad Bowhunter
  • **
  • Posts: 545
Re: tab trimming advice?
« Reply #8 on: May 10, 2012, 05:36:00 PM »
I may be confusing you instead of helping you.


So you're talking about near the END of your ring finger, not below?
Is a life of rice cakes really life, or just passing time?-Rick Bragg

Online Tall Paul

  • Trad Bowhunter
  • **
  • Posts: 545
Re: tab trimming advice?
« Reply #9 on: May 10, 2012, 05:39:00 PM »
See, bowgy, I'm wondering the same thing.  So I need the advice too!
Is a life of rice cakes really life, or just passing time?-Rick Bragg

Offline Larry m

  • Trad Bowhunter
  • **
  • Posts: 1006
Re: tab trimming advice?
« Reply #10 on: May 10, 2012, 05:45:00 PM »
Be careful about how much you take off. I followed the contour off the end of the tab once and got a bit carried away. Looked ok when trimming and was thinking about more of the hook aspect and how it fit my fingers. Ended up taking to much off and having the ends of my fingers taking a beating. Gave the tab away to some one with a smaller hand.

Offline Green Mountain Boy

  • Trad Bowhunter
  • **
  • Posts: 147
Re: tab trimming advice?
« Reply #11 on: May 10, 2012, 08:12:00 PM »
Im going to the basement  to try the baby powder method right now!
That's why they call it hunting....

No Name 50# at 28" (maybe Ben Pearson)
'69 Bear Grizzly 40# at 28"
Great Plains Wolf Creek  50# at 28" one piece
Fruit of the Loom Size Large

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2866
Re: tab trimming advice?
« Reply #12 on: May 10, 2012, 08:56:00 PM »
Put the tab on your finger and grab the string like your going to shoot.

Look and see how much tab is past your fingers, then trim a little(I use scissors).

Then grab the string again with the tab and see if you trimmed enough, if not then trim a little more. Remember  trim a LITTLE at a time.

You can trim until the tab is just a hair past your fingers or even with your fingers. This is when you grab the string.

I wear an XLarge glove but I buy a medium tab and I only have to trim a little. Hopes this helps.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©