3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Arrow's weight  (Read 423 times)

Offline Cinghiale

  • Trad Bowhunter
  • **
  • Posts: 108
Arrow's weight
« on: July 31, 2007, 12:58:00 PM »
Hi guys,
I was reading about some one use a 700 grains arrow for Elk hunting.
My question is : How canI add weight to my arrow for more penetration ?
I shoot a 55# @28"  recurve with 2018 29" lenght shaft ( 357 grains from Easton chart ) equipped with a 190 grains Snuffer broadhead , plus 20 grains of insert  for a total of 567 grains , I have not idea about 5" feathers and nock's weight .
What have I to do ? More lenght arrow....or change to a 2020 ....?????  :archer:
Logged
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: Arrow's weight
« Reply #1 on: July 31, 2007, 01:02:00 PM »
If it's shooting fine, why mess with it?
Logged

Offline Cinghiale

  • Trad Bowhunter
  • **
  • Posts: 108
Re: Arrow's weight
« Reply #2 on: July 31, 2007, 01:20:00 PM »
Yes it is shooting fine, I was asking because it seem to be more important weight instead arrow speed. I don't shoot a very speed bow and next season I'll use it on very hard to kill wild boars..not pigs....really wild european boars . Last season I don't recovered a big one so I'd like to eliminate most part of failures on the equipment.

Ciao
Logged
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: Arrow's weight
« Reply #3 on: July 31, 2007, 01:24:00 PM »
The first thing I'd suggest it comsidering a narrow 2-blade head, because a 55# recurve shooting well-tuned 567-grain arrows is more than enough to blow through a bull elk.
Logged

Offline the Ferret

  • Trad Bowhunter
  • **
  • Posts: 3232
Re: Arrow's weight
« Reply #4 on: July 31, 2007, 01:28:00 PM »
Quote
Originally posted by Jason R. Wesbrock:
The first thing I'd suggest it comsidering a narrow 2-blade head, because a 55# recurve shooting well-tuned 567-grain arrows is more than enough to blow through a bull elk.
Agree with Jason (he is a very knowledgable fella!) :thumbsup:  It will also anchor any size hog you want to shoot as long as you don't hit a large shield squarely. In that case, change shot angle and bring the shot from behind the ribs/shield to the opposite shoulder.
Logged
There is always someone that knows more than you, and someone that knows less than you, so you can always learn and you can always teach

Offline RamiusEng

  • Trad Bowhunter
  • **
  • Posts: 142
Re: Arrow's weight
« Reply #5 on: July 31, 2007, 01:30:00 PM »
Any idea on the speeds you are getting with 567 grain arrows?  Just wanna know because I shoot the same weight bow with the same draw.
Thank you in advance.
Logged
Ray

the "go to":Toelke R/D Whip 62" 55#@28.5

Offline Cinghiale

  • Trad Bowhunter
  • **
  • Posts: 108
Re: Arrow's weight
« Reply #6 on: July 31, 2007, 01:30:00 PM »
Thanks Jason,  last season I shooted a 160 grains  RIBTEK , do you think is a good broadhead ?
I can get a really sharp edge with an Accusharp and it's strong enough to penetrate on a brik in the wall without big damage !!    :banghead:
Logged
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Offline Cinghiale

  • Trad Bowhunter
  • **
  • Posts: 108
Re: Arrow's weight
« Reply #7 on: July 31, 2007, 01:32:00 PM »
Hi Ray, no I have not Idea about the speed.
Logged
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Offline Cinghiale

  • Trad Bowhunter
  • **
  • Posts: 108
Re: Arrow's weight
« Reply #8 on: July 31, 2007, 01:41:00 PM »
Thanks Jason,  last season I shooted a 160 grains  RIBTEK , do you think is a good broadhead ?
I can get a really sharp edge with an Accusharp and it's strong enough to penetrate on a brik in the wall without big damage !!    :banghead:
Logged
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: Arrow's weight
« Reply #9 on: July 31, 2007, 01:44:00 PM »
I've heard a lot of good things about Ribteks, although, I've never used them myself.
Logged

Offline Ric Anderson

  • Trad Bowhunter
  • **
  • Posts: 91
Re: Arrow's weight
« Reply #10 on: July 31, 2007, 02:00:00 PM »
I can't speak for the hogs since I've only killed one of them, but I do believe your equipment is adequate for elk.  3-1 broadhead designs such as Grizzles, have proven themselves in studies as well as in the field.
Logged
.

Offline NorthShoreLB

  • Trad Bowhunter
  • **
  • Posts: 634
Re: Arrow's weight
« Reply #11 on: July 31, 2007, 02:17:00 PM »
RIBTEK are greeeat broadheads   :bigsmyl: ...shot thru a few pigs like butter.

1/4" plastic tubing that you can get at the hardware store will ad in the neigborought of 150gr.

....I would get those arrows in the 700gr range to, ..it can't hurt, well maybe the pigs   :bigsmyl:    :bigsmyl:
Logged
"Almost none knows the keen sense of satisfaction which comes from taking game with their own homemade weapons"

-JAY MASSEY-

Offline carphunter100

  • Trad Bowhunter
  • **
  • Posts: 130
Re: Arrow's weight
« Reply #12 on: July 31, 2007, 02:18:00 PM »
Sounds like you have enough weight. I shot a huge Bull Buffalo the only thing that stoped a pass through is I centered a rib on the exit side. I shot this buffalo with a 59 lbs. Morrison with a 2216 with a Magnus II with bleaders. The arrow weight was 536. I no an elk is not as big as a buffalo. I have never shot an elk but if I ever get a chance to elk hunt I belive I will go with a 2 blade.
Logged
Member WV Bowhunters Associaion Life member of Trad. Bowhunters of Southern WV

Offline Cinghiale

  • Trad Bowhunter
  • **
  • Posts: 108
Re: Arrow's weight
« Reply #13 on: July 31, 2007, 02:52:00 PM »
Sorry Jay, the  plastic tubing you are talking about is it the soft pvc  ??

Armando
Logged
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Offline NorthShoreLB

  • Trad Bowhunter
  • **
  • Posts: 634
Re: Arrow's weight
« Reply #14 on: July 31, 2007, 03:13:00 PM »
YEAH    :bigsmyl:
Logged
"Almost none knows the keen sense of satisfaction which comes from taking game with their own homemade weapons"

-JAY MASSEY-

Offline Rick McGowan

  • Trad Bowhunter
  • **
  • Posts: 878
Re: Arrow's weight
« Reply #15 on: July 31, 2007, 04:13:00 PM »
Cingiale, are you sure your arrows are tuned for perfect flight? I would think that the 2018's with that much point weight would be a bit weak in spine. The reason I ask is that the soft plastic tubing will weaken the spine even more. Anything you add full length to the inside of the shaft, that adds weight, but has no spine of its own will weaken the dynamic spine of the shaft. The Ribteks heads are good and easy to sharpen, but weren't the best in the penetration tests I did. The 160 Grizzly or STOS did better.
Logged

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Arrow's weight
« Reply #16 on: July 31, 2007, 08:18:00 PM »
I agree with Jason as well and according to Dr. Ashby light arrow guys with high foc are gonna be happy, as it seems they are getting as good as penetration as some of the heavy arrow guys. Shawn
Logged
Shawn
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©