3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: 4 fletch =nock high?  (Read 384 times)

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
4 fletch =nock high?
« on: July 09, 2012, 07:15:00 PM »
It did for me today.  I was paper tuning today and no matter what I tried 4 fletch arrows were kicking nock high.  I couldn't figure out what was going on until i grabbed an arrow with three fletch and all was well.  Suspect arrows were Gold Tips, one had 4" feathers the other 5" didn't seem to matter.  Anyone seen this before?

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8259
  • Contributing Member
Re: 4 fletch =nock high?
« Reply #1 on: July 09, 2012, 08:08:00 PM »
Sunds like one of your four fletches is hitting the riser shelf on release, kicking the tail of the arrow up. Turn the nock a little to get better fletching clearance.

Offline mmisciag

  • Trad Bowhunter
  • **
  • Posts: 552
Re: 4 fletch =nock high?
« Reply #2 on: July 09, 2012, 08:14:00 PM »
Brad,

How did your bare shafts fly? I am in the middle of tuning my bow and had nock down flight. I have a limb bolt bow quiver. When I took it off, the nock down flight abated a bit. There are many things to look at. I need to try a wrap on or slide on quiver. You really need to see how a bare shaft flys.

Martin
***************************************************************

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: 4 fletch =nock high?
« Reply #3 on: July 09, 2012, 08:15:00 PM »
Thats what i figure as well.  Will play more in the future, but multiple arrows were doing it we'll see.

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: 4 fletch =nock high?
« Reply #4 on: July 09, 2012, 08:17:00 PM »
I'm not a fan of bare shaft tuning, always found paper tuning quicker and easier.  Shameless plug, I've got a nice thunderhorn wrap on quiver in the classifieds cheap.

Offline xtrema312

  • Trad Bowhunter
  • **
  • Posts: 3163
Re: 4 fletch =nock high?
« Reply #5 on: July 10, 2012, 08:25:00 AM »
What are the feather angles for the 4 fletched?  I shoot the 75x105 with the 105 up and down.  I get great flight and better than 3 fletch for clearance.
1 Timothy 4:4(NKJV)
For every creature of God is good, and nothing is to be refused if it is received with thanksgiving.

Firefly Long Bow  James 4:14
60" MOAB 54@29 James 1:17

Michigan Longbow Association

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: 4 fletch =nock high?
« Reply #6 on: July 10, 2012, 08:34:00 AM »
Running 4-90 on a bitzenburger which is a little more x then +.

Offline KentuckyTJ

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 8651
Re: 4 fletch =nock high?
« Reply #7 on: July 10, 2012, 08:41:00 AM »
I had the same issue with 4-90 not long ago with a new bow, which made me break down my setup and start from scratch. Your arrows spine is the issue. The spines on your current length arrows are just barely in that bows range. To properly fix it you will need to make them either longer or shorter or add or take away point weight. Mine went 1/2" longer and the 4-90's flew perfect. If its way out you may need different spined shafts.

When your spine is correct it won't matter what fletch configuration you use they will all clear your riser properly.

You are 30 minutes from me. I think you should drive down and we could tinker with it together. Always enjoy meeting my trad Brothers.
www.zipperbows.com
The fulfillment of your hunt is determined by the amount of effort you put into it  >>>---->

Offline Biathlonman

  • Trad Bowhunter
  • **
  • Posts: 2367
Re: 4 fletch =nock high?
« Reply #8 on: July 10, 2012, 11:52:00 AM »
TJ let me know when and I'm game...

Or you cam come this way, I'm actually mostly working day shift instead of my usual nights for the next couple weeks.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©