Tiller on Dalaa Riser

[rlc1959]

I shoot 3 under and have a 17" Dalaa Riser with border Hex Limbs. The limbs are longs and make a 62" bow. What should the tiller be set at ?? ( Too start) even or what.

Thanks for your help, Randy

[JRY309]

Most bowyers tillering for 3under will use an even tiller.Whats nice about the Dalaa is that i is adjustable you can play around with the tiller.

[Boomerang]

Even for 3 under is good.

[rlc1959]

Thanks guys. I need to loosen the bottom limb an extra turn and a half to get even. Is that normal ??

[A.S.]

Randy, I think it's fairly common to have to turn one limb bolt farther than the other to get the tiller even. I would set it even tiller and start tuning.

[Avid Archer]

, Instead of loosening the bottom bolt 1.5 turns to achieve even tiller, adjust both bolts equally in opposite directions, bottom 3/4 turn out, top 3/4 turn in to achieve same result.

[rlc1959]

Thanks, I will start at even and fine tune as needed.

[rlc1959]

The top limb is only out one turn from being bottomed out. I was told that I should not shoot them tight ( bottomed out) ?? Is this true ??

[A.S.]

Yep, the bolts need to be back out at least enough so the limbs will easily slide out when you are taking them off the riser.