3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: looking for a leather crafter, custom work only.  (Read 240 times)

Offline Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2798
looking for a leather crafter, custom work only.
« on: November 08, 2012, 07:32:00 AM »
I am trying to find someone who I can send knives too, that will make me 2 custom sheaths 1 horizontal and one with a 25 gegree lean like a mtn man style that are custom made for the knife I send.  

I also want an arm guard with sheath made but for my knife only which was made by another knife maker and easily fits the criteria of a small knife that would be sheathed onto an arm guard (PRJ 3" blade/Giraffe handle) and the arm guard  will be a certain length that I want but longer to go from my wrist to elbow but an inch shorter and the knife handle is facing my wrist on the bottom when your holding your arm up.

talked with another sheath maker and his work is great but I need something different.

who out there in cyber world will take my specs and I'll send them 1 knife at a time and make me something truely custom made?
"Us vs Them"

Offline slowbowjoe

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1352
Re: looking for a leather crafter, custom work only.
« Reply #1 on: November 08, 2012, 07:58:00 AM »
Steve Catts, "Leathersmith", made me a cross-draw sheath that I'm totally happy with. Lots of folks here have his quivers; he makes armguards also.

Art Vincent, "Cedar Ridge" leather, is a sponsor here that also does custom work, I haven't used his work myself but again, lots of folks here speak highly of him.

Online Jim Wright

  • Trad Bowhunter
  • **
  • Posts: 1324
Re: looking for a leather crafter, custom work only.
« Reply #2 on: November 08, 2012, 08:32:00 AM »
Scott Teaschner, owner of Wyoming Wildlife Artistry (307)587-9979) does work that pictures don't do justice to. He is a superb Craftsman.

Offline Mojostick

  • Trad Bowhunter
  • **
  • Posts: 1364
Re: looking for a leather crafter, custom work only.
« Reply #3 on: November 08, 2012, 08:42:00 AM »
Another Steve Catts plug. I personally think most back quivers for common hunting situations are far too roomy/noisy, so I had Steve Catts make me up a custom 4-5 arrow back quiver, since I don't need to haul a dozen hunting arrows anywhere. The quiver is top quality, and with the top opening being only 4" across and lambs wool lined, the fletchings hold the arrows in place so well that I could sprint with the loaded quiver on my back and it wouldn't make a sound.
If I was going to have something similar made, I'd call Steve Catts in a heartbeat.

Offline Firstarrow

  • Trad Bowhunter
  • **
  • Posts: 480
Re: looking for a leather crafter, custom work only.
« Reply #4 on: November 08, 2012, 08:49:00 AM »
Tim @ Farrwest leather is a sponsor here. He has the arm guarda with knives figured out!
Being first, making a mark and being part of
something great!
Rich

May you keep the wind to your nose, have the patience of Job, and have your Firstarrow fly true.

Offline Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2798
Re: looking for a leather crafter, custom work only.
« Reply #5 on: November 08, 2012, 12:22:00 PM »
thank you guys I'll do some checking with these folks and see who can help me out, very important that its made for my knife which I can send till its completed..    mojostick,,, I agree with you 100percent on that,, also take into condieration with a loose quiver if you fall or stumble forward you could easily get a few arrows stuck in the face or neck with a loose back quiver,, tight to the back and smaller for the essential amount,, heres  trick to ad to the next custom amde back quiver like you described is broahdhead sheaths inside with raw hide tether cords just long enough so you can sheath the broadhead at the top of the quiver and then pull the cord out through a tight hole on the bottom of the quiver as you put in the arrow and finally tie a small knot in the raw hide so it won't come out with the broadhead when you take the arrows out,,     well 4 or 5 tight holes with the rawhides eventually tied together under the bottom of the quiver then again as you remove an arrow it pulls the broadhead from the little sheath there inside and no dull broadheads.
"Us vs Them"

Offline TRAP

  • Trad Bowhunter
  • **
  • Posts: 2747
Re: looking for a leather crafter, custom work only.
« Reply #6 on: November 08, 2012, 12:59:00 PM »
Try Marty Overstreet at Circle Bar T custom leathers.

Marty does amazing high end work on holsters scabbards sheaths etc

Trap
"If you don't like change, you're going to like irrelevance even less" Gen. Eric Shinsheki

"If you laugh, and you think, and you cry, that's a full day, that's a heck of a day." Jim Valvano.

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: looking for a leather crafter, custom work only.
« Reply #7 on: November 08, 2012, 01:34:00 PM »
Anybody have a pic of the an armguard sheath combo.  Have never seen one and would like too!
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Offline YORNOC

  • Trad Bowhunter
  • **
  • Posts: 2993
Re: looking for a leather crafter, custom work only.
« Reply #8 on: November 08, 2012, 02:20:00 PM »
pm sent. the leathersmiths mentioned here are top notch. all of them.
David M. Conroy

Offline Archie

  • Trad Bowhunter
  • **
  • Posts: 1792
Re: looking for a leather crafter, custom work only.
« Reply #9 on: November 08, 2012, 11:28:00 PM »
I don't know any of these leather guys, but everything I've seen on this site by Scott Teaschner has looked top-notch.
Life is a whole lot easier when you just plow around the stump.

2006  64" Black Widow PMA
2009  66" Black Widow PLX
2023  56" Cascade Archery Whitetail Hawk
2023  52" Cascade Archery Golden Hawk Magnum

Offline adkmountainken

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4994
Re: looking for a leather crafter, custom work only.
« Reply #10 on: November 09, 2012, 07:09:00 AM »
Art Vincent, GREAT guy and top notch work, can't go wrong!
I go by many names but Daddy is my favorite!
listen to everyone,FOLLOW NO ONE!!
if your lucky enough to spend time in the mountains...then your lucky enough!
What ever befalls the Earth befalls the sons of the Earth.

Offline Lamey

  • Trad Bowhunter
  • **
  • Posts: 1677
Re: looking for a leather crafter, custom work only.
« Reply #11 on: November 09, 2012, 07:26:00 AM »
Scott Teaschner is a sponsor, and is also very helpfull if anyone has leather questions etc.  His work is the best of the best in my view.

Offline Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2798
Re: looking for a leather crafter, custom work only.
« Reply #12 on: November 09, 2012, 12:08:00 PM »
yes all good leathersmiths and thats what makes this hard but some only work with certain knives so I need to be able to mail a knife to them.  

thank you all for the posts I'm waiting for a few replys back from some of these folks.
"Us vs Them"

Offline maxwell

  • Trad Bowhunter
  • **
  • Posts: 1113
Re: looking for a leather crafter, custom work only.
« Reply #13 on: November 09, 2012, 04:42:00 PM »
Scott at wyoming wildlife makes excellent leather goods.

Offline huntnmuleys

  • Trad Bowhunter
  • **
  • Posts: 1594
Re: looking for a leather crafter, custom work only.
« Reply #14 on: November 09, 2012, 10:16:00 PM »
Another plug for wyoming wildlife artistry and scott!
is it September yet??

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©