3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: 4-3" feathers.....anyone ?  (Read 186 times)

Offline Nathan Killen

  • Trad Bowhunter
  • **
  • Posts: 674
4-3" feathers.....anyone ?
« on: December 19, 2012, 02:40:00 PM »
I'm currently shooting 4-4" shield cut feathers with broadheads and get great flight. I mostly like the 4 feathers because of there looks. I'm pondering on trying 3" feathers in the 4 feather configuration. Any of you guys use 4-3" feathered shafts with broadheads ? And yes I know a perfectly tuned arrow/bow combo should shoot most anything! Lol
Genesis 21:20 And God was with the lad; and he grew, and dwelt in the wilderness, and became an archer. ->>>---------------->

Jesus is my lord and savior, Who is he to you ?

60" Little Mountain built by Ethan Rodrigue

Offline bigbadjon

  • Trad Bowhunter
  • **
  • Posts: 1472
Re: 4-3" feathers.....anyone ?
« Reply #1 on: December 19, 2012, 03:01:00 PM »
I use 4 3in fletchings but I have a disclaimer. My 3in feather are in tradititional cuts so still has the surface of a 4in. I wouldn't recommend smaller that 4in with shield or parabolic. I think vanes can be shorter though as they are stiffer.
Hoyt Tiburon 55#@28 64in
A&H ACS CX 61#@28in 68in (rip 8/3/14)

Offline Swinestalker

  • Trad Bowhunter
  • **
  • Posts: 663
Re: 4-3" feathers.....anyone ?
« Reply #2 on: December 19, 2012, 03:30:00 PM »
I use 4 fletch 3 inch Tru-Flight shield cut on some of my arrows and have not had a problem shooting broadheads. I use Woodsmans and Tusker Concordes mostly. Have not tried it with any of the really large heads though.
Having done so much, with so little, for so long, I can now do anything with nothing.

Offline bearsfeet

  • Trad Bowhunter
  • **
  • Posts: 385
Re: 4-3" feathers.....anyone ?
« Reply #3 on: December 19, 2012, 04:06:00 PM »
I used to shoot 4x3 parobilics with a high FOC arrow out of a 47@28 checkmate hunter 2 and they flew great! the 4 3" feathers I thought were much less affected by cross winds which was nice.

I am back shooting 3 5" shields and because I just like the look of the feather better. back a few years ago I fletched up a few arrows all with the same grain arrow and went out and shot... Pretty surprised how much better the 4x3" shot in cross winds. The 3x5" were the worst by far. this was on a very windy day shooting outside so there are lots of varibles, but I still feel like the 4x3 is a killer feather choice. It was also quiter in flight.

good luck.
Levi
Levi Bedortha

Offline stalkin4elk

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 389
Re: 4-3" feathers.....anyone ?
« Reply #4 on: December 19, 2012, 05:25:00 PM »
I use some 4 x 3" parabolics and also have great flight with high foc and well tuned bareshafts.
I also have tried 4 x 2" Ashby cut,4" x 2 shield, and 5" x 2 parabolic fletch. They all seemed the same excellent flight with well tuned bareshafts and are very quiet in flight.I was in the mood to tinker a while back and deviate from the standard larger fletching. I think they all can work with good tuning and I also know others will disagree.   :campfire:

Offline drewsbow

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 5902
Re: 4-3" feathers.....anyone ?
« Reply #5 on: December 19, 2012, 05:41:00 PM »
If your set up is tuned you don't need that much feather. I use four two inch feathers with broadheads without a problem. Drew
Try to be the person your dog thinks you are :0)
TGMM Family of the Bow
N.Y. Bowhunters member
BigJim 3 pc buffalo 48@28
BigJim thunderchild 55@31
BigJim thunderchild 55@32 Jim's bow

Offline petalumapete

  • Trad Bowhunter
  • **
  • Posts: 245
Re: 4-3" feathers.....anyone ?
« Reply #6 on: December 19, 2012, 06:09:00 PM »
I use a 3 inch 3 fletch on my target and 3D arrows. No problems . I don't have a. Chrono but it looks like the arrows fly faster. Maybe it's just me. I do know I don't have the same drop at 30 yards that I do with 4 or 5 inch.

I don't think they  woud be good with broad heads not enough steerage
Big Foot Sasquatch Recurve
64" 57#@ 27.5
Big Foot Flat Liner Long Bow
64" 49#@

Offline Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3928
Re: 4-3" feathers.....anyone ?
« Reply #7 on: December 19, 2012, 06:17:00 PM »
I had been using 4 X 4" but this year I tried 4 X 3.5". Three deer and two turkeys...no problems....they were shield cut. I'll make a few with 3" fletches and see what happens with the Spring turkeys.
The best things in life....aren't things!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©