3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: 100 gr screw in broadheads  (Read 651 times)

Offline Luke Vander Vennen

  • Trad Bowhunter
  • **
  • Posts: 449
100 gr screw in broadheads
« on: August 26, 2007, 05:36:00 PM »
I think I finally fixed my arrow problem, now I just have to buy some new broadheads. What good 3 blade broadheads are available in 100 grains? Price is a bit of a factor here   :readit:  

Thanks
Logged
Dances with Turtles

Offline Frenchymanny

  • Trad Bowhunter
  • **
  • Posts: 2379
Re: 100 gr screw in broadheads
« Reply #1 on: August 26, 2007, 05:41:00 PM »
How many heads do you need Luke?
I have 2 or 3 "Thunder something" I can send you, in the 125grs.

F-Manny
Logged
Coureur des Bois
Big Jim: Buffalo Bows 62" 60@27 & 65@27 ThunderChilds 56" 62@27 & 62@27 Desert BigHorn 59@27
ML, Shrew &TC Knives
With a sturdy bow, a true shaft, and a stout heart, we journey forth in
search of adventure.

Dr. Saxton Pope

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: 100 gr screw in broadheads
« Reply #2 on: August 26, 2007, 06:02:00 PM »
Luke, if 25 grains will not make a differene buy some 100 grain Snuffers and a dhort BH adapter(25grs.) If it does Steelforce makes a nice 100 grain cut on contact BH. Shawn
Logged
Shawn

Offline Lefty

  • Trad Bowhunter
  • **
  • Posts: 1383
Re: 100 gr screw in broadheads
« Reply #3 on: August 26, 2007, 06:49:00 PM »
Luke,
  If a two blade head would work for you, I have 8 Bear broadheads.  You can add the insert and make them a 4 blade and then they would weigh 110 grains.  I have some of the inserts and would send them all to you for free.  They need sharpened and one is nicked up on the end, but would make a good practice head and the other seven would make hunting heads.  Just PM me if you want them.
Chris
 
Logged

Offline deadpool

  • Trad Bowhunter
  • **
  • Posts: 826
Re: 100 gr screw in broadheads
« Reply #4 on: August 26, 2007, 06:50:00 PM »
muzzy!! thats all i use!!
Logged

Offline Matty

  • Trad Bowhunter
  • **
  • Posts: 3111
Re: 100 gr screw in broadheads
« Reply #5 on: August 26, 2007, 06:58:00 PM »
Try the G5 montec 100 gr. they are cut on contact 1pc hardened steel, i use the 2 blade version b-52, They fly like field points i have a Brand new package of those if you are interested.
Logged

Offline Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9153
Re: 100 gr screw in broadheads
« Reply #6 on: August 26, 2007, 09:43:00 PM »
Something wrong with Snuffers?  :confused:  

Killdeer
Logged
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline Luke Vander Vennen

  • Trad Bowhunter
  • **
  • Posts: 449
Re: 100 gr screw in broadheads
« Reply #7 on: August 26, 2007, 11:13:00 PM »
Wow thanks for the offer Chris, I might take you up on that. They're not left-handed broadheads though are they?  ;)  PM headed your way.

Manny I think 125gs might be a little too heavy. 100s are right on the verge of making my shafts too weak, and I'm afraid the 125s might be just a little push over the edge. Thanks for the offer though.

Killie I wasn't aware that they made 100 grain Snuffers. Shows how much I know  :knothead:  


Thanks for all the help
Logged
Dances with Turtles

Offline insttech1

  • Trad Bowhunter
  • **
  • Posts: 447
Re: 100 gr screw in broadheads
« Reply #8 on: August 26, 2007, 11:19:00 PM »
Luke,
They do make 100 snuffers, but you need an adapter, so you're back up to 125.

I don't "think" they make 100gr finished screw-in snuffers, but you could check the cabela's website to find out...

You could also try some 4-blad zwickey's that would finish around 100gr with an adapter...maybe 105 or 110'ish...

Or those bear razorheads offered above look pretty good.

The Montec's listed are nice...but as you say...money is a concern...and I wouldn't pay $30+ for 3 of them myself...just my opinion.

Good luck this year!!
Marc
Logged
"When you catch Hell--DROP IT!!  When you're going thru Hell--DON'T STOP!!"

Offline Luke Vander Vennen

  • Trad Bowhunter
  • **
  • Posts: 449
Re: 100 gr screw in broadheads
« Reply #9 on: August 26, 2007, 11:27:00 PM »
Hey Marc, good to see you around. How have you been? I think I'm taking Chris up on his offer for the Bears. I'm going to do my best to get some blood on them.

Good luck in the woods

P.S. I still carry that knife when I'm hunting.
Logged
Dances with Turtles

Offline RC

  • Trad Bowhunter
  • **
  • Posts: 4450
Re: 100 gr screw in broadheads
« Reply #10 on: August 26, 2007, 11:30:00 PM »
Muzzy 100 grain three blade would be hard to beat unless you used the phantom 100 grain four blade.RC
Logged

Offline TaterHill Archer

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 603
Re: 100 gr screw in broadheads
« Reply #11 on: August 27, 2007, 12:50:00 AM »
NAP HellRazor in 100 gr
Snuffer SS in 100 gr
Magnus Stinger 4 blade 100 gr
Logged
Jeff

"Make yourselves sheep and the wolves will eat you."  Benjamin Franklin

Offline Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9153
Re: 100 gr screw in broadheads
« Reply #12 on: August 27, 2007, 05:43:00 AM »
Logged
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline James Wrenn

  • Trad Bowhunter
  • **
  • Posts: 1933
Re: 100 gr screw in broadheads
« Reply #13 on: August 27, 2007, 08:03:00 AM »
Luke I would put a thin piece on the sideplate of your bow to tune it to 125gn heads.It would take very little to adjust centershot to be able to use heads more readily available. jmo
Logged
....Quality deer management means shooting them before they get tough....

Offline insttech1

  • Trad Bowhunter
  • **
  • Posts: 447
Re: 100 gr screw in broadheads
« Reply #14 on: August 27, 2007, 12:13:00 PM »
Thanks for the link Killy...but those are $35 for three...a bit beyond Luke's means, I'm afraid...

And I'm doing well, Luke.  Got a new Widow coming to try out and everything!  

Glad to hear the knife's still working with ya'...

Good luck with your BH search...
M
Logged
"When you catch Hell--DROP IT!!  When you're going thru Hell--DON'T STOP!!"

Offline Luke Vander Vennen

  • Trad Bowhunter
  • **
  • Posts: 449
Re: 100 gr screw in broadheads
« Reply #15 on: August 27, 2007, 07:44:00 PM »
James that's actually exactly what I have done to allow myself to shoot these 100 grains. The carbons I have are too soft for my bow, so I built out the riser plate until there's almost no room left for the arrow. If I do it anymore I might as well be shooting off the knuckle.
Logged
Dances with Turtles

Offline Lefty

  • Trad Bowhunter
  • **
  • Posts: 1383
Re: 100 gr screw in broadheads
« Reply #16 on: August 27, 2007, 10:04:00 PM »
Luke,
  Mailed them out today.  Be careful opening the box.  Have a good season!
Chris
Logged

Offline Carbon Caster

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 775
Re: 100 gr screw in broadheads
« Reply #17 on: August 27, 2007, 10:14:00 PM »
Luke, have you thought about cutting a few inches or more off of your arms??!!!!!!  

HAVE YOU EVER SEEN A PICTURE OF HIS ARMS?  Boy must have an honest to goodness 33" draw!

How have you been Lil Fred?
Logged
Gen 27:3  "Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;"

In His service,
Brian Rice

TGMM Brotherhood of the Bow

Offline Luke Vander Vennen

  • Trad Bowhunter
  • **
  • Posts: 449
Re: 100 gr screw in broadheads
« Reply #18 on: August 27, 2007, 11:41:00 PM »
Thanks Chris. I'll do my best to put tthem to good use.

Brian I have thought of doing something like that, but that would make me an average person. I like to be above average  :D  . You would be proud of me. I was drawing in front of a mirror today and was working on stretching out to full draw all the way. I drew the tip of a 145 grain point on a full length carbon with a brass insert onto the shelf. I guess I'm still growing  :D   :D  

I'm doing pretty good, thanks for asking. This sunday I'm moving out to start my Wildlife Biology degree at the University of Guelph, so that'll be a huge change. I don't think I'll be able to shoot on campus, and i have no idea what kind of hunting time I'll be able to have, especially if I make the volleyball team. Only time will tell. How have you been? Family doing well?
Logged
Dances with Turtles
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©