Morrison ILF brace height?

[Scott Grella]

I just picked up a 17" Morrison wood/phenolic ILF riser that will be matched with medium Winex limbs.  It'll make a 60" bow and I'm having a string made and was curious as to what the recommended bh should be.
Thanks again for all the help hear?
Scott

[Scott Grella]

As an added question for you ILF masters.  I'm trying to figure out my approximate # range.  So if my Winex limbs say #38 I'm assuming that's on a 25" riser?  So then I would add #7-#8 going down to a 17" riser, right?  So will I end up with a range of #45-#50ish or ???  
Thanks again for all the help.  
Scott

[Shawn Leonard]

Call Bob, he has always been very helpful and likes to talk!    Shawn

[Bill Carlsen]

His MAX I limbs should be 6.5" to 7". However, I also have Winex limbs and they shoot best for me at 7 3/8".

[beendare]

17" riser with long Innos and mine shoots well at 7 1/8" brace

[katman]

Bob's site has a chart showing brace height recommendations

 http://morrisonarchery.com/Riser_charts/riser_charts.html

[Scott Grella]

Thanks for all the help guys.  One more question, when I put the limbs in the riser is appears that the limb itself is never going to actually touch the riser if the makes sense.  The limbs rest solely on the limb post and the little silver fitting.  I'm just wondering if that normal because on my excel riser, the limb does touch the riser when strung up.

[Scott Grella]

Thanks for all the help guys.  One more question, when I put the limbs in the riser is appears that the limb itself is never going to actually touch the riser if the makes sense.  The limbs rest solely on the limb post and the little silver fitting.  I'm just wondering if that normal because on my excel riser, the limb does touch the riser when strung up.

[Scott Grella]

Oops sorry bout that!

[T Mowery]

The Limbs on my Morrison ILF, when bottomed out in the pocket's,do not touch the riser!