3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Adhesive for footings.  (Read 440 times)

Offline tracker12

  • Trad Bowhunter
  • **
  • Posts: 1796
Adhesive for footings.
« on: June 07, 2013, 06:54:00 PM »
I want to build up a few stump arrows with aluminum footings.  Never did any before.  What type of adhesive do you like for gluing them.
T ZZZZ

Offline benny

  • Trad Bowhunter
  • **
  • Posts: 210
Re: Adhesive for footings.
« Reply #1 on: June 07, 2013, 07:16:00 PM »
JB Weld

Offline TxAg

  • Trad Bowhunter
  • **
  • Posts: 2910
Re: Adhesive for footings.
« Reply #2 on: June 07, 2013, 07:19:00 PM »
gorilla super glue works. gota be fast, though  :)

Offline Jakeemt

  • Trad Bowhunter
  • **
  • Posts: 858
Re: Adhesive for footings.
« Reply #3 on: June 07, 2013, 10:03:00 PM »
gonna have to second jb weld. I have no direct experience footed carbons however, I have used both adhesives for insert glue on my xx75 and 78's. The problem I have had with gorilla super glue and blunt points like hex heads is that the bond tends to break and drive my point and insert into the shaft effectively destroying it. when I switch to jb weld this was no longer a problem. I have had excellent results with gorilla super glue for fletching my arrows however. These are the only two I am familiar with though and there certainly may be others even better suited to your task as I am not even close to being an expert.

Online Steve O

  • Trad Bowhunter
  • **
  • Posts: 5311
Re: Adhesive for footings.
« Reply #4 on: June 07, 2013, 10:06:00 PM »
JB Weld.  I actually stopped footing my HIT carbons once I started using JB Weld for the inserts.

Offline Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: Adhesive for footings.
« Reply #5 on: June 07, 2013, 10:16:00 PM »
MT-13
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Offline mbugland

  • Trad Bowhunter
  • **
  • Posts: 142
Re: Adhesive for footings.
« Reply #6 on: June 07, 2013, 10:24:00 PM »
I used hotmelt... and they haven't budged. All but the one I buried in my fence post. I think that was just because I was excited that i had some.  I put my last set of inserts in with JB Weld
Shootz!

Offline ishoot4thrills

  • Trad Bowhunter
  • **
  • Posts: 3445
Re: Adhesive for footings.
« Reply #7 on: June 07, 2013, 10:55:00 PM »
I use standard Gorilla(not super) glue and have not had any problems at all with it with my footings.
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

Offline tracker12

  • Trad Bowhunter
  • **
  • Posts: 1796
Re: Adhesive for footings.
« Reply #8 on: June 08, 2013, 06:24:00 PM »
Thanks for the recommendations.
T ZZZZ

Offline Craig

  • Trad Bowhunter
  • **
  • Posts: 608
Re: Adhesive for footings.
« Reply #9 on: June 08, 2013, 07:35:00 PM »
I use the epoxy that comes with the shafts. Why waste it.
Schafer Silvertip

Offline Sockrsblur

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2244
  • Lake Placid Ironman Triathlete 2011, 2012, 2018
Re: Adhesive for footings.
« Reply #10 on: June 08, 2013, 07:47:00 PM »
is JB Weld forever?
As in can you clean it out of a glue on tip or reuse a 100 grain brass insert that's put in place with it?
TGMM Family of the Bow
"Hunt Hard!" Uncle Bud
PBS Member

Offline Bldtrailer

  • Trad Bowhunter
  • **
  • Posts: 1055
Re: Adhesive for footings.
« Reply #11 on: June 08, 2013, 08:49:00 PM »
Iron insert it's heat revesable
As we get older our bow weight goes down and our body weight goes up, One of Lifes little jokes.
Bringing Archery to
 Wounded Warriors

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: Adhesive for footings.
« Reply #12 on: June 08, 2013, 09:26:00 PM »
Quote
Originally posted by Sockrsblur:
is JB Weld forever?
As in can you clean it out of a glue on tip or reuse a 100 grain brass insert that's put in place with it?
Probably not.Good epoxies take quite a bit of heat to undo.You will hear advice about heating a point etc.When I epoxy an insert into a shaft,heating won't get it loose without destroying the shaft.

I like epoxy but I have learned to only glue when I'm sure I have things where I want them to stay.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©