3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Question About Easton Shafts  (Read 237 times)

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1321
Question About Easton Shafts
« on: July 24, 2013, 12:37:00 PM »
Hi everyone, I recently acquired some EASTON game-getter II shafts, all of the shafts are 2219, however some of them say XX75 on the shaft while others do not. Is there a difference between the two? Thanks!

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Question About Easton Shafts
« Reply #1 on: July 24, 2013, 01:57:00 PM »
Are they all Game Getter II shafts.The XX75 is they are made out of 7075-T9 alloy.Most of the Easton aluminum arrows are made out of 7075-T9 except a couple of models like XX78 are made from 7178-T9.And their Fall Stalker are made from 5086 alloy,really low tensile strength like 58,000 psi when compared to XX75 at 95,000 psi  and XX78 at 100,000 psi.A 2219 is a 2219 with same GPI and spine it's just some have different tensile strength.If all your shafts are GGII they should be the same strength,some older shafts were not always marked as clear.

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1321
Re: Question About Easton Shafts
« Reply #2 on: July 24, 2013, 02:09:00 PM »
John,
Thank you for clarifying that for me. All the shafts I have say Gamegetter II on them; some are a more brown color, these are the shafts that are not marked XX75, they do look older than the shafts that are marked XX75 which have a more silver coloration. I just wasnt sure whether or not there would be any difference when tuning/shooting these arrows.

Offline Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3928
Re: Question About Easton Shafts
« Reply #3 on: July 24, 2013, 02:50:00 PM »
They will shoot the same. It is just that the ones with the lower tinsel strength will not take the abuse of an XX75....they are of a softer aluminum alloy.
The best things in life....aren't things!

Offline buckeyebowhunter

  • Trad Bowhunter
  • **
  • Posts: 1321
Re: Question About Easton Shafts
« Reply #4 on: July 24, 2013, 10:09:00 PM »


heres a pic of the two side by side, any chance that the unmarked ones are still XX75? Also do both shafts still weigh the same; regardless of whether they're xx75 or not? Thanks fellas

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Question About Easton Shafts
« Reply #5 on: July 25, 2013, 05:55:00 AM »
As I recall the older Gamegetters were 6061 aluminum...seems like at some point Easton upgraded the material to 7075...they will weigh the same...regardless of the material, with .019 wall thickness 2219's are pretty tough arrows...not indestructable though as I have bent and busted lots of them or I would still have the full dozen XX78 Grand Slams instead of the one lonely one I have left...in today's world a 2219 is essentially a .340 spine...not for everybody but as a long draw shooter I would love to have a dozen or so Grand Slams...just gonna have to make do with the 2317's I have left from the nineties

DDave
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©