150 grain rubber blunt?

[Bear Heart]

After accidentally leaving my arrow with the last saunders 145 gr blunt I need to get more.  Don't want all metal or judo.  They both stick in trees and can be hard on the shaft. Any ideas? Sponsors?

[r-man]

to bad arrows are not 1/4 28thread, then you could just screw anything you wanted on.  I say check 3R

[TxAg]

You could use a slip on rubber blunt. I like to use them over a steel blunt, but they can be used over a bare arrow shaft also. Might be something to tinker with anyways. If you took a hack saw to a regular field point and then used one of these, you could probably make weight.

    http://www.kustomkingarchery.com/Rubber-Blunt/productinfo/4766/  

  http://www.3riversarchery.com/Tred+Barta+Bunny+Buster+Small+Game+Blunts_iH511X_baseitem.html  


Also, two small washers behind the 125 saunders and you'd be right at 150...
 http://www.3riversarchery.com/Bludgeon+Screw-In+Blunt_i4367X_baseitem.html

[Bear Heart]

Originally posted by TxAg:
You could use a slip on rubber blunt. I like to use them over a steel blunt, but they can be used over a bare arrow shaft also. Might be something to tinker with anyways. If you took a hack saw to a regular field point and then used one of these, you could probably make weight.

     http://www.kustomkingarchery.com/Rubber-Blunt/productinfo/4766/    

   http://www.3riversarchery.com/Tred+Barta+Bunny+Buster+Small+Game+Blunts_iH511X_baseitem.html  


Also, two small washers behind the 125 saunders and you'd be right at 150...
  http://www.3riversarchery.com/Bludgeon+Screw-In+Blunt_i4367X_baseitem.html  

I had that one on my lost arrow only it was the 145or 150 they stopped making. Best blunt imho.

[Bear Heart]

any opinions on the Black Widow 160 grain one.

[Jon Powell]

I've used the 160's from Black Widow and have no complaints. It's a good head.