3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: speed /fps of a samick volcano  (Read 325 times)

Offline jean-vincent

  • Trad Bowhunter
  • **
  • Posts: 124
speed /fps of a samick volcano
« on: August 28, 2013, 04:49:00 AM »
can somebody tel me the speed IBO or AMO. of a samick volcano .
merci !!
jack of all trades , master of none !!
 http://lames-de-jv.e-monsite.com/

Offline DayTripper

  • Trad Bowhunter
  • **
  • Posts: 171
Re: speed /fps of a samick volcano
« Reply #1 on: August 30, 2013, 08:23:00 PM »
Bon jour Jean-Vincent,
Comment çava? Espérons que cette information aide.

I.B.O. (International Bowhunters Association)A.M.O.(Archery Manufacturing Organization) and  both have a method for testing arrow speed from bows and although they are different both can be used to compare equipment for relative speed.

Both of the speed testing standards use a constant drawlength, arrow weight and bow weight to test bowspeed. These are the way the two differ.

I.B.O.
Under this standard the bow being tested will have a maximum pull weight of 70lbs. The arrow will have a grain weight of 350(5 grains of arrow weight per pound of bow weight). The draw length will be set at 30 inches. The chronograph used for measuring the speed will be placed at point blank range for testing.

A.M.O.
Under this standard the bow being tested will have a maximum pull weight of 60lbs. The arrow will have a grain weight of 540(9 grains of arrow weight per pound of bow weight). The draw length will be set at 30 inches. The chronograph used for measuring the speed will be placed at point blank range for testing.


What is important about these two speed ratings is that they are only to be used to compare bows speed tested under the same standard. They should NOT be used to tell you what you will personally shoot for speed. For example lets take an average archer……Bill Bowshooter……..Bill has a 29 inch draw length shoots his bow at 65 lbs and shoots a 455 grain aluminum arrow. In our example neither the A.M.O. or the I.B.O standards will accurately reflect the speed of Bill’s bow. Since Bill is shooting a shorter draw than both standards, shooting an arrow that weighs 7 grains of arrow weight per pound of bow weight, and is shooting 65 lb peak weight he will shoot at a speed very different to either standard.

If we try to make some generalizations about the two different ratings we could say that the I.B.O. speed rating is much faster than most archers could achieve, and conversely the A.M.O. speed rating reflects a speed that is less than what most shooters could achieve with the same bow. If a bows I.B.O. speed rating is 320fps and its A.M.O. speed rating is 245fps that would mean the average archer would shoot that bow somewhere in the middle of that range.

Offline jean-vincent

  • Trad Bowhunter
  • **
  • Posts: 124
Re: speed /fps of a samick volcano
« Reply #2 on: August 31, 2013, 02:01:00 AM »
thanks for taking the time to answer ..
i'm looking for the speed (IBO or AMO )of a samick volcano ..
it's just by curiosity ..
jack of all trades , master of none !!
 http://lames-de-jv.e-monsite.com/

Offline skunkhound

  • Trad Bowhunter
  • **
  • Posts: 83
Re: speed /fps of a samick volcano
« Reply #3 on: August 31, 2013, 06:01:00 AM »
One of the techs at Lancaster Archery should know, they're a pretty big Samick dealer.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©