3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: arrow holder on hill style or Not  (Read 335 times)

Online Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2834
arrow holder on hill style or Not
« on: October 19, 2013, 03:35:00 AM »
so on my vixen when hanging in the tree the arrow likes to fall off the rest every time I slightly touch the bow,,, it will fall off the rest then hang on the string for a second and fall to sticks in the ground.  its happened a hundred times before with other bows I've hunted with but seriously whats the cure.

I'm hoping some kind of temporary arrow holder trick because I don't want to have a permanent arrow holder stuck to this longbow,,, or do you some of you guys just load the arrow when a deer comes into sight.
"Us vs Them"

Offline magnus

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3550
Re: arrow holder on hill style or Not
« Reply #1 on: October 19, 2013, 08:00:00 AM »
This was my fix on my off the knuckle bow. Rubber and and a match. It works pretty good. Just a hint. Have a few extras handy.

 

 
Keeping the Faith!
Matt
TGMM Family of the bow
 Turkey Flite Traditional  
[email protected]

Offline Paul_R

  • Trad Bowhunter
  • **
  • Posts: 448
Re: arrow holder on hill style or Not
« Reply #2 on: October 19, 2013, 10:11:00 AM »
That's pretty ingenious Magnus! Does it just pop off when you draw? Interesting looking bow too...
"My opinion is free and worth every penny"

Offline magnus

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3550
Re: arrow holder on hill style or Not
« Reply #3 on: October 19, 2013, 11:08:00 AM »
Paul not my idea just one I picked up somewhere. May have been here. Yes it pops off as you draw. You have to play around with the right band as you don't want it too tight or too loose. The hard part is finding it after it pops off. Hence the extras. Lol !
Keeping the Faith!
Matt
TGMM Family of the bow
 Turkey Flite Traditional  
[email protected]

Offline T-Bowhunter

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: arrow holder on hill style or Not
« Reply #4 on: October 19, 2013, 11:15:00 AM »
Great Idea! Thanks for sharing.
William

JD Berry Valor 66” 45@28
Great Northern Bush Bow 62" 47@28"
Traditional Bowhunters of Florida

Offline centaur

  • Trad Bowhunter
  • **
  • Posts: 3952
Re: arrow holder on hill style or Not
« Reply #5 on: October 19, 2013, 12:14:00 PM »
Here is my setup from the off side of the riser.
   
On the front side it looks like this.
 

Doing it this way, the rubber band that holds the arrow stays with the setup, and you don't have to search for it.
If you don't like cops, next time you need help, call Al Sharpton

Offline Bobby Urban

  • Trad Bowhunter
  • **
  • Posts: 1211
Re: arrow holder on hill style or Not
« Reply #6 on: October 19, 2013, 12:27:00 PM »
I know many of you will scream sacrilege but I think of my bows as tools.  I take good care of my tools but also will mod them so that they work as perfectly as possible every time.  The first thing I do with every bow I own is drill a tiny hole in the riser right at the arrow shelf and press or glue in a tiny pin with 1/8-1/4" sticking out.  I have a lifetime supply of hair tie rubber bands that I hook on the pin, wrap around the arrow and re-hook.  Holds the arrow perfectly and pops off as you draw.  Works perfectly every time.  Essentially a permanent, fail proof version of the above idea.

Online Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2834
Re: arrow holder on hill style or Not
« Reply #7 on: October 19, 2013, 01:49:00 PM »
hey thanks for the tips,,  I do liek the matchstick trick and will try it,,, Centaur I can't figure that set up you have is it two elastics???

Bobby,,, I think I know what you mean but can you take a pic?   wondering about when carrying the bow does the pin play havoc with the first layer of skin on your hand?
"Us vs Them"

Offline centaur

  • Trad Bowhunter
  • **
  • Posts: 3952
Re: arrow holder on hill style or Not
« Reply #8 on: October 19, 2013, 02:00:00 PM »
First put the rubber band that will hold the arrow on the toothpick, then attach the toothpick to the shelf with a second rubber band. The first rubber band wraps around the arrow, and when you start the draw, the band will come off and the arrow is free. I use the setup in cold weather when holding the arrow with my finger gets too nippy.
If you don't like cops, next time you need help, call Al Sharpton

Online Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2834
Re: arrow holder on hill style or Not
« Reply #9 on: October 20, 2013, 06:40:00 AM »
thanks for clarifying that I couldn't see the elastic from the left side of the bow so that was confusing me..  makes sense because the tooth pick stays with the bow for that second and third arrow.
"Us vs Them"

Offline bicster

  • Trad Bowhunter
  • **
  • Posts: 577
Re: arrow holder on hill style or Not
« Reply #10 on: October 20, 2013, 10:07:00 AM »
I use one of the arrow holders . I just use the 3M foam tape to stick it on. I haven't had any problems taking them back off or removing the adhesive. They haven't left any marks on my bows either.

Offline eflanders

  • Trad Bowhunter
  • **
  • Posts: 699
Re: arrow holder on hill style or Not
« Reply #11 on: October 20, 2013, 10:28:00 AM »
OP:  Do a search on "arrow holders" and you will see that this topic has been asked many times before and that there are many options out there to consider.  Each option has it's own pros & cons regarding practicality, reliability and what potential they have for making a mark on your bow.

Unfortunately the one I have been using for years is no longer being produced.  But you can easily replicate it using a coat hanger, some heat shrink tubing and a few rubber bands for materials.

Offline Bobby Urban

  • Trad Bowhunter
  • **
  • Posts: 1211
Re: arrow holder on hill style or Not
« Reply #12 on: October 20, 2013, 11:03:00 AM »

 
Here is one of my recurves - I couldn't find a pick of any longbows but it gives the idea and works the same on either.  Yes the pin is there and you can feel it when you carry the bow upside down but it is not something that will be jabbing into your hand.  You can go thicker if that is an issue but I just use a tine piece of welding rod or whatever I have available.  I think this one is a piece of light coat hanger.  It is real simple and just works.  I know many fear adding anything to their bow - but resale is not effected unless it were some rare collectable and makes any bow "better" imo.  I never sell bows anyway - just stock pile.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©