Best cut-off wheels?

[Jim Harris]

I just bought one of the Harbor Freight Cut-Off Saws to cut carbon shafts. It uses a 2" diameter blade. I found some blades in various websites. Some are .032 thick, some .062 and even thicker. Can you tradgangers recommend the best blade thickness for this saw. I think the abrasive type blades are what I need. Thanks, Jim.

[Tom McNamara]

Jim,

I have been using the Harbor Freight mini cutoff saw for several years. I made a jig by mounting it on a board.  I just had to replace the blade.  I could not find any locally but I did find these on e-bay:
 Size is 2", 3/8 arbor, long lasting,Thickness: 1/32
Here is the link or do a search on "Abrasive Cut-Off Wheel Arrow Saw Blade":

 http://cgi.****.com/Abrasive-Cut-Off-Wheel-Arrow-Saw-Blade-Qty-5_W0QQitemZ170146638645QQihZ007QQcategoryZ36097QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I just used them on some Carbon Express Heritage shafts and they work great.

[Jim Harris]

Thanks Tom. I am goin' to get some of these to try. Jim.

[JEFF B]

i use a dremel fixed to the table with a jij mounted to the table works real good and it is cheap did i say cheap. i love cheap as long as it works.