125 gr Wensels?

[longstick]

Are these all glue on? Ive looked all over the net and all I see are the 125s.I figure by the time I add the weight of the adapter Im coming out about the same as shooting my 150s,,is there an advantage to this or am I just missing it?

[STRAYARROW]

as far as I know the 125 gr. are all glue on if you want screw in you have to go with the 150 gr.
which are the 125gr. with aluminum adapters.
Tracy

[longstick]

Looks like if I want to shoot 125 Im going to have to shoot my cedars then

[Jwilliam]

Strayarrow,is right. 125gr. glue-on or 150 screw-in.

Bill

[Biggie Hoffman]

???? Longstick, you're right that if you want to shoot 125 you'll have to shoot cedars or swaged aluminum but just out of curiosity, what's the diff??   Nobody shoots THAT good that they can tell the diff in 25 grains of point weight. Except maybe Robert Carter........

[James Wrenn]

You can also use a glue-in adapter instead of the threaded insert on most sizes of aluminum and carbon shafts if point weight is that critical.Personally I would just tune the bow to the 150gn weight and shoot them.As Biggie says it should not matter if your bow is tuned to the middle of the spine rage it shoots anyway.jmo