3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Bow quiver question  (Read 646 times)

Offline IAhunter86

  • Trad Bowhunter
  • **
  • Posts: 16
Bow quiver question
« on: February 20, 2014, 11:43:00 AM »
Hey guys, I'm new to the world of trad archery. I've been shooting a a compound for several years and recently found myself very intrigued by the thought of taking big game with a stick and string. So, I shopped around for a little while and shot a few bows. I ended up purchasing the very first recurve I've ever shot. A new Bear Grizzly #50. I love it. I cant stop shooting it. Anyways, I'm looking for a bow mounted quiver. My bow has the inserts that allow for a thumb screw attached quiver. My question is, should I make use of the option or are thier better options out there? I like the Great northern 5 arrow quiver, but its $100. I also like the Kanati side mount quivers. But I've seen thier are cheaper options if I go with a strap on type. This bow is for practical hunting purposes. I'm not a target shooter. I Shoot my bow to be proficient in the field so what I'm asking is what would be a good option for hunting purposes. I hunt from a tree harness or stand mostly. And I'm also wondering if the ammount of arrows held by the quiver plays a role in the quiver of your choice? Thanks in advance for your advice and expertise.

Offline Will Cocke 2

  • Trad Bowhunter
  • **
  • Posts: 557
Re: Bow quiver question
« Reply #1 on: February 20, 2014, 11:54:00 AM »
Anytime you can keep from adding something to the working portion of the limbs you are better off.  Some strap ons enable you to strap it more to the riser others are not wide enough to fit anywhere but on the limbs.  My personnel preference is using the side mount quiver inserts.  Check the classifieds used ones pop up all the time.

Offline IAhunter86

  • Trad Bowhunter
  • **
  • Posts: 16
Re: Bow quiver question
« Reply #2 on: February 20, 2014, 11:59:00 AM »
Thanks I'll check it out.

Offline Major Boothroyd

  • Trad Bowhunter
  • **
  • Posts: 92
Re: Bow quiver question
« Reply #3 on: February 20, 2014, 12:03:00 PM »
There are definitely more experienced archers who will hopefully chime in, but I'll give you some answers according to my experience.  Incidentally, I started with a compound too, and although I still own one, I never shoot it anymore.  Welcome to the Trad world!

I like bow quivers for a couple of reasons:

1.  By adding some mass to the bow (longbow or recurve) they can help with stabilizing.

2.  Lots of people feel (and I agree) that having the quiver mounted on the bow and peering through the bow and quiver at game can break up your outline to the animal.  Effectively enhancing your overall camouflage.

3.  The arrows are right there when you need them, easily accessible and within your field of view.

4.  A lot of folks feel it's easier to stalk more quietly with a bow mounted quiver.

As for capacity, one old time archer answered this way, when I asked him about what capacity I should get.  He said, "Well, I wouldn't want to go out with only three arrows, and seven's too many."  I have stuck with 5 arrow bow quivers ever since.

My bow does not have inserts for quiver mounting, so I use the strap types.  I would guess the insert types would work as well if not better.

As for specific quivers, I really like the Eagle Flight Archery quivers, but I also have a Selway Slide on Longbow quiver that I use 90+ % of the time.  I shoot  with it on all the time, so the balance of the bow is the same whether I am at the archery range or in the field.

I do, however, like to use a hip quiver or a back quiver for shooting matches at the range, while leaving my bow quiver on for the above stated reason.  In a match, a hip or back quiver is so much easier to deal with when shooting a lot of arrows.  I also think the arrow grabbers and foam on my bow quiver won't wear out as easily as they would if I was using the arrows out of the bow quiver for matches.

Offline Major Boothroyd

  • Trad Bowhunter
  • **
  • Posts: 92
Re: Bow quiver question
« Reply #4 on: February 20, 2014, 12:05:00 PM »
Oops... Widowdoublelung posted before I finished my post.  I didn't mean to make it sound like I was referring to him when I said, "hopefully more experienced archers will chime in...!"

His post wasn't there yet!  No offense intended!

Offline Sean B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3484
Re: Bow quiver question
« Reply #5 on: February 20, 2014, 12:05:00 PM »
I agree with Widowdoublelung.  I like a quiver mounted to my riser.   If you're not in the financial situation to buy new, look for a used mounted quiver
Sean
PBS Regular Member
Comptons
NY Bowhunters Association
BW KB X
BW PCH X
BW PSR X
Robertson Tribal Styk

Offline shirikahn

  • Trad Bowhunter
  • **
  • Posts: 228
Re: Bow quiver question
« Reply #6 on: February 20, 2014, 12:12:00 PM »
I think that the Bear quiver for the inserts on your bow would be a great addition.  But there are quite a few options out there.

Online Stumpkiller

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3860
Re: Bow quiver question
« Reply #7 on: February 20, 2014, 03:13:00 PM »
I hunted last season with a Great Northern strap-on attached to a 58" recurve and I added a set of Selwey PiggyBackers to carry a sixth arrow so I had two blunts and four broadheads.  But then I'm dopey enough to stump shoot quite a bit during deer season while most others may not.

Anyway, I can heartily endorse the Great Northern as worth the price.  In the past I have used the cheap plastic Bear and Kwickee quivers and was never happy with either.  I still have an original Kwikee Kwiver with the exposed broadheads - now there was a hoot.  The "Deluxe" model with the seperate party noisemaker & point guard that clipped to an arrow shaft.  

My more common method of hunting is a single arrow quiver - home made hybrid - and a side quiver with five broadheads arrows jabbed into a foam plug and two blunts.

Obvously both are viable as a lot of bowhunters use one or the other or, like me, alternate.  If its rainy or snowing I prefer the side quiver as I can slip a polarfleece hood over the fletching and it stays dry.  That also makes the quiver silent in the brush and easy to tuck up aaginst my body when ducking or crawling under tangles.
Charlie P. }}===]> A.B.C.C.

Bear Kodiak & K. Hunter, D. Palmer Hunter, Ben Pearson Hunter, Wing Presentation II & 4 Red Wing Hunters (LH & 3 RH), Browning Explorer, Cobra II & Wasp, Martin/Howatt Dream Catcher, Root Warrior, Shakespeare Necedah.

Offline Bowhunter4life

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1633
Re: Bow quiver question
« Reply #8 on: February 20, 2014, 03:56:00 PM »
I agree with Will, I'd rather have inserts in the riser portion that my quiver is attached to...  But, if that isn't an option, and the quiver has to be mounted to the limbs themselves I do my best to get them as close to the riser as I can.  As far up the fade of the limb towards the riser as they will go to keep them away from the "working" part of the limb.
"Bowhunting isn't a hobby or a sport... It's a way of life!"

Quote: "Everything you read on the internet is the truth." -Abraham Lincoln
 
>>>-TGMM Family of the Bow--->

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: Bow quiver question
« Reply #9 on: February 20, 2014, 05:47:00 PM »
Lots of good slip-on, strap-on and screw-on quivers available.  Most manufacturers make all three designs.  Can reduce the cost by buying used. Check out the classifieds here.  If you already have the threaded inserts, why not use them.

BTW, I carry four arrows in my bow quivers -- three broadheads and a blunt.  Don't know about the rest of the folks, but I seldom get more than one shot at a critter.  Good luck.

Offline Mr. fingers

  • Trad Bowhunter
  • **
  • Posts: 900
Re: Bow quiver question
« Reply #10 on: February 20, 2014, 07:22:00 PM »
I think predator or hunters niche make a side mount quiver for a decent price. I know I was eye balling it for my sons grizzly.

Offline Mr. fingers

  • Trad Bowhunter
  • **
  • Posts: 900
Re: Bow quiver question
« Reply #11 on: February 20, 2014, 07:32:00 PM »
Actuall cabelas carries the hunters niche predator quiver. I'm having trouble getting on there site right now but I see they have the acorn brown leather version on sale from $79.99 to $59.99 .  Not a bad deal!

Offline IAhunter86

  • Trad Bowhunter
  • **
  • Posts: 16
Re: Bow quiver question
« Reply #12 on: February 20, 2014, 07:32:00 PM »
I just placed an order for a Kanati dual ARC quiver that attaches to the riser inserts. Selling point: Totally adjustable from arrow height to the cant on the bow. Can move close to riser or further away to make for a more stable and balanced feel. Should be here next week pics to follow.

Offline Marc B.

  • Trad Bowhunter
  • **
  • Posts: 1047
Re: Bow quiver question
« Reply #13 on: February 20, 2014, 10:06:00 PM »
You'll like it. John makes top notch stuff!

Offline KeganM

  • Trad Bowhunter
  • **
  • Posts: 248
Re: Bow quiver question
« Reply #14 on: February 20, 2014, 10:13:00 PM »
I love my Thunderhorn BOA. It's cheap, quiet, and since only one of my bows has ever had inserts in the side I can use it on everything. I mount it right on the end of the fades. I do put a short 2" section of bike inner tube on the limb where I strap it on to keep it from sliding around when the straps start to wear (took me about a year of shooting with it on all the time). Since then though, haven't had any issues.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©