3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Nock LOW Grizzly STiks  (Read 330 times)

Offline sean boyer

  • Trad Bowhunter
  • **
  • Posts: 18
Nock LOW Grizzly STiks
« on: September 20, 2007, 08:50:00 AM »
hi everybody   hope your Season is going well.
i need help FAST LOL.  60" Griffin longbow  48lb. @ 28".  29 1/4 " Grizzly stiks. 75gr. brass insert 175gr. point. total arrow about 535gr.  Cock feather IN.  brace height  7 1/8.  nocking point.....i don't have a bow square or whatever ya call it.(i know this is important and i should get one)   it looks like around 1/2".  KEEPS FLYING NOCK LOW. DOES FINGER PRESSURE AND BOW HAND PRESSURE MESS THINGS UP ??? KEEPS FLYING NOCK LOW !! PLEASE HELP !
thank you  gentlemen in advance.  i  think i would kill myself if it werent for this forum

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Nock LOW Grizzly STiks
« Reply #1 on: September 20, 2007, 09:31:00 AM »
Nock low, lower the nock a little
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline sean boyer

  • Trad Bowhunter
  • **
  • Posts: 18
Re: Nock LOW Grizzly STiks
« Reply #2 on: September 20, 2007, 10:09:00 AM »
k.....thank you thank you  thank you

Offline doctorbrady

  • Trad Bowhunter
  • **
  • Posts: 402
Re: Nock LOW Grizzly STiks
« Reply #3 on: September 20, 2007, 10:13:00 AM »
Sean,
VM13 is right, however using the old nock this or that method can be VERY deceiving.  Do yourself a favor and look at OL's site about arrow tuning.  It is the best that I have read.  If you follow it (and make sure your nocks aren't too tight), you will be worlds ahead on tuning your bow.  Best wishes.

Offline Bob Morrison

  • Trad Bowhunter
  • **
  • Posts: 1067
Re: Nock LOW Grizzly STiks
« Reply #4 on: September 20, 2007, 05:38:00 PM »
Rise nock.

Offline bowbender1

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 18
Re: Nock LOW Grizzly STiks
« Reply #5 on: September 20, 2007, 05:47:00 PM »
Bob's correct raise the nock if your seeing nock low.

Offline doctorbrady

  • Trad Bowhunter
  • **
  • Posts: 402
Re: Nock LOW Grizzly STiks
« Reply #6 on: September 20, 2007, 05:53:00 PM »
Whoops.  Bob is right.  I need to pay more attention next time.  If your nock it shooting low, your nocking point usually needs to go up.  Again, not the best way to bare shaft tune, but my mistake above.  This is not an uncommon occurance with the Grizzlysticks because they are tapered and the nock end is skinnier than the shaft end. If you place the nock where you would normally set it you won't be accounting for the thicker part of the shaft that is on the rest at full draw.

Offline BigRonHuntAlot

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3189
Re: Nock LOW Grizzly STiks
« Reply #7 on: September 20, 2007, 05:57:00 PM »
That makes good sense. I never thought about why I needed a higher nocking point on my AD's but that's it.
>>>-TGMM Family Of The Bow-->

The Moon Gave Us The Bow, The Sun Gave Us The Arrow

Walk Softly and Carry a Big Stick

Offline Mozarkid

  • Trad Bowhunter
  • **
  • Posts: 14
Re: Nock LOW Grizzly STiks
« Reply #8 on: September 21, 2007, 10:25:00 AM »
Just in case you're wondering why the grizzlies need a nock adjustment...
the shafts have a larger radius up front than other arrows; this raises the height of the arrow's centerline with respect to the riser shelf.  The nock point has to be raised this same amount.
Christ isn't a name, it's a title, earned by and given to only one man.

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©