3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Light weight tree stands  (Read 603 times)

Online wood carver 2

  • Trad Bowhunter
  • **
  • Posts: 2722
Light weight tree stands
« on: December 02, 2014, 04:35:00 PM »
Not wanting to hijack a previous thread, I wanted to ask a question or two about tree stands.
I've been thinking about getting a climber for moose hunting in northwest Ontario. This fall I had four bulls come in at the same time at dusk and because of the terrain and my being on the ground, I couldn't see any of them until one walked by well after dark, when I couldn't see well enough to shoot him.
My question is will a climber work safely in those tall, skinny black spruce trees? They average 6 to 8 inches diameter at 10 feet or so height. I was thinking of a Lone Wolf.
My partner thinks I should get a hang on, but I'm not sure I'd like that option.
The stand has to be a real feather weight because of the terrain we negotiate up there.
Dave.
" Vegetarian" another word for bad hunter.

Online GregD

  • Trad Bowhunter
  • **
  • Posts: 407
Re: Light weight tree stands
« Reply #1 on: December 02, 2014, 04:55:00 PM »
I have a lonewolf climber and although I think it is the best climber out there I don't think you could call it a feather weight. I think you would be a lot better off with a small strap on stand and a few sticks. It's lighter and you can get in any tree. I have a Chippewa Ghost that does well in small trees. I'm sure there are others. Good luck.

Offline Keb

  • Trad Bowhunter
  • **
  • Posts: 415
Re: Light weight tree stands
« Reply #2 on: December 02, 2014, 04:56:00 PM »
Lone wolf assualt and sticks, you can get in any tree you want, crooked, leaning ect.

stand and sticks weigh about 17 pounds or so.

Offline Dale in Pa

  • Trad Bowhunter
  • **
  • Posts: 203
Re: Light weight tree stands
« Reply #3 on: December 02, 2014, 05:14:00 PM »
I would get a lightweight hang on and 5 screw in steps. That will get you up 10 ft. I'm not sure what's available as I have a couple of Loc Ons that aren't made anymore, but the one is only 5 3/4# and the other is 8 or 9#. Much handier than a bulky climber and climbing sticks.

Offline freedomhunter

  • Trad Bowhunter
  • **
  • Posts: 179
Re: Light weight tree stands
« Reply #4 on: December 02, 2014, 05:22:00 PM »
My Summit open shot will not work on those trees at 10 feet.  The biggest problem with climbers is getting in and out quiet and finding the right tree.  8 - 20 inches is the sizes for the open shot and if your starting at 8 good luck trying to get up any distance in the tree.
How then shall they call on him in whom they have not believed? and how shall they believe in him of whom they have not heard? and how shall they hear without a preacher?
Romans 10:14 KJV

Offline recurvehunt

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Light weight tree stands
« Reply #5 on: December 02, 2014, 06:43:00 PM »
I personally always advocate the hang-on option as I believe its more versatile, and if you get the right equipment it can be much lighter.

Over the last year or so I did a lot of digging and came up with the following; and after patiently waiting was able to purchase these items used.

Sticks:  Lone Wolf Mini Sticks (believe they are no longer produced by lone wolf, but can be found used).  With three sticks and a two-loop stirrup on bottom stick I can get top of third stick to 15 feet which matches elevation of hang-on platform.  Each stick weighs 1.5lbs (4.5 total)

Stand:  Lone wolf's original hang on was a sand cast aluminum platform that had greenish color. It weighs about 9lbs and has same platform size as new alphas (2lbs lighter than current assault with bigger platform)

A newer model, then one above, yet still out of production has the same appearance as todays yet only weighs 8 lbs and once again has platform size closer to current alpha.

Bought both of those used, so all totaled up I'm in the 13 lb range for 15ft height.  Which is plenty if you get in a thick tree with plenty of cover.

Offline KSdan

  • Trad Bowhunter
  • **
  • Posts: 2463
Re: Light weight tree stands
« Reply #6 on: December 02, 2014, 08:13:00 PM »
recurvehunt is on it.  I now have a little larger stand than in the pic- but the set-up is still the same.  Foam blocks keep everything sturdy, low profile, and dead quiet.  One of my KEY cardinal rules:  NO METAL tinking sounds in the woods.  Metal means man!!  I never make any noise with the LW set-up. EVERY whitetail hunt for me is a first time on stand.  Portable. 1 time up. 10 minutes set-up.  This system is so simple, light, and versatile.  The only next step lighter is the tree saddle- but even that gets within just 2# of this with the number of tree steps you need as a platform.

 
If we're not supposed to eat animals ... how come they're made out of meat? ~anon

Bears can attack people- although fewer people have been killed by bears than in all WWI and WWII combined.

Offline nineworlds9

  • Trad Bowhunter
  • **
  • Posts: 4605
  • Northman
Re: Light weight tree stands
« Reply #7 on: December 02, 2014, 09:29:00 PM »
Look up X-stands.  11 pounds.  Very clever design.
52" Texas Recurve
58" Two Tracks Ogemaw
60" Toelke Chinook
62" Tall Tines Stickflinger
64" Big Jim Mountain Monarch
64" Poison Dart LB
66" Wes Wallace Royal
            
Horse Creek TAC, GA
TBOF

Offline PaulDeadringer29

  • Trad Bowhunter
  • **
  • Posts: 552
Re: Light weight tree stands
« Reply #8 on: December 02, 2014, 09:34:00 PM »
My brother just bought the Chippewa Super Ghost. I think it's 6-7lbs but the platform is small. But it is super easy to hang and very stable once it's hung....I'm very impressed by the way this stand sets up. Screw in steps would keep it super light although they require more effort.

Offline LB_hntr

  • Trad Bowhunter
  • **
  • Posts: 1153
Re: Light weight tree stands
« Reply #9 on: December 02, 2014, 09:44:00 PM »
Another vote for lone wolf stand and sticks, a good safety harness and lineman's belt and you can hunt almost any tree and very fast up and down.
 The system just plain works great and is very light weight and quiet.

Offline Cootling

  • Trad Bowhunter
  • **
  • Posts: 387
Re: Light weight tree stands
« Reply #10 on: December 02, 2014, 10:05:00 PM »
I use a Lone Wolf assault and Lone Wolf sticks.  Two sticks would get you to 8 feet, which may be plenty for your moose-hunting purposes.

Offline VTer

  • Trad Bowhunter
  • **
  • Posts: 1247
Re: Light weight tree stands
« Reply #11 on: December 02, 2014, 10:07:00 PM »
You'll be making lots of noise breaking off all those spruce limbs trying to get to hunting height. Spruce trees are great to hide in when you have time to prep the tree beforehand, but I don't think they'll work in stealth mode no matter what stand your using.
Schafer Silvertip 66#-"In memory", Green Mountain Longbow 60#, Hill Country Harvest Master TD 59#

"Some of the world's greatest feats were accomplished by people not smart enough to know they were impossible."
    - Doug Lawson.

Offline Danny Roberts

  • Trad Bowhunter
  • **
  • Posts: 578
Re: Light weight tree stands
« Reply #12 on: December 02, 2014, 10:24:00 PM »
Whatever hang on you get use the rapid rails, easiest things in the market to use. Good luck and send us some moose pics.

Offline hunting badger

  • Trad Bowhunter
  • **
  • Posts: 233
Re: Light weight tree stands
« Reply #13 on: December 02, 2014, 11:27:00 PM »
Tree sling, or stand of that sort, you can wear them, and screw in steps, preferably the larger size. Light weight and very quiet. carry a folding saw also. Great for" run and gun hunting " , and calling, make sure you practice out of the sling, it takes some getting use too.

Offline njloco

  • Trad Bowhunter
  • **
  • Posts: 2357
Re: Light weight tree stands
« Reply #14 on: December 03, 2014, 11:23:00 AM »
I have an old Lo-On Light @ 7#, two lone wolf sticks and my pack and Safari tough quiver, all weigh less than most stands. I spot and stalk from the ground and can easily do it with this gear on my back, if I find a good ambush spot with plenty of sign, I can easily get up a tree to about 10-12 feet.
  • Leon Stewart 3pc. 64" R/D 51# @ 27"
  • Gordy Morey 2pc. 68" R/D 55# @ 28"
  • Hoyt Pro Medalist, 70" 42# @ 28" (1963)
  • Bear Tamerlane 66" 30# @ 28" (1966)- for my better half
  • Bear Kodiak 60" 47# @ 28"(1965)

Offline RedShaft

  • Trad Bowhunter
  • **
  • Posts: 1700
Re: Light weight tree stands
« Reply #15 on: December 03, 2014, 12:29:00 PM »
Quote
Originally posted by Cootling:
I use a Lone Wolf assault and Lone Wolf sticks.  Two sticks would get you to 8 feet, which may be plenty for your moose-hunting purposes.
Is that with the short sticks or the long ones?
Rough Country.. The Hunters Choice

Offline Kyle Lancaster

  • Trad Bowhunter
  • **
  • Posts: 372
Re: Light weight tree stands
« Reply #16 on: December 03, 2014, 02:00:00 PM »
I've used the following:

- Loc on  Limit stand  - 7.5- 8 lbs
- Treehopper bolts and dril bit
- Lone wolf stands
- Lone wolf sticks
- Bison Gear tree stand pack

I sold the Loc on, because while light, it wasn't comfortable, for me, to sit on.

I also sold the pack, because, while it's a "slick" deal, I now just use the straps on the stands and attach my day pack to it.

Now I do the following... for long walks where I'll leave the stand, I use the Treehopper bolts and the stand. I drill the tree and leave the top bolts and take the bottom ones with me. If I plan to go up one time and not return to the tree I use the sticks so that I don't have to drill.

Good Luck!

Offline tracker12

  • Trad Bowhunter
  • **
  • Posts: 1796
Re: Light weight tree stands
« Reply #17 on: December 03, 2014, 03:11:00 PM »
Lone wolf assault or when I really want to go light I use an old Loggy Bayou Light.
T ZZZZ

Offline DaveT1963

  • Trad Bowhunter
  • **
  • Posts: 893
Re: Light weight tree stands
« Reply #18 on: December 03, 2014, 04:12:00 PM »
I use a tree saddle and three modified hawk helium sticks (cut to 24 inches, two steps and rope attachment, I also have a 24 inch web stirrup on each)... I get 18-20 foot with this set up and total weight is under 9 pounds for my entire set up (sticks weigh about 1.5 pounds a piece).  I have preset ratchet, if not add in another 2 pounds for 3 stepp ladder steps as a platform.  I also ditched the original saddle straps for nylon runners and make adjustments with a simple figure eight knot.
Everything has a price - the more we accept, the more the cost

Caribow Tuktu ET 53# @ 27 Inches
Thunderhorn takedown longbow 55# @ 27
Lots of James Berry Bows

Online wood carver 2

  • Trad Bowhunter
  • **
  • Posts: 2722
Re: Light weight tree stands
« Reply #19 on: December 03, 2014, 05:08:00 PM »
Thanks for the advice guys. There's a lot of good info to mull over before I buy a set up.
Dave.
" Vegetarian" another word for bad hunter.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©