Which shaft size

[stikbowshooter]

Looking for some input from people.  I am shooting a bear grizzly (45@28), I draw right at 28".  Should I go with 1916 or 2016s? and what length might work best and what about broadhead weight?  Thanks for all your help!

[Pine]

If you went with the 2016s you could leave them long and cut back till it tunes straight . try 125gr. Point and if you can go heavier you can .
Don't cut shorter than 1" longer than your draw length . It you sneak up on it , you can tune them very close .
Would be nice if you had a person watch over your shoulder to see the arrow flight ie fish tailing and or proposing .
If you don't have help you should paper tune .

If you are drawing 45# at your DL, I would bet the 1916's will be a better fit, unless you were planning on going with a LOT of front end weight.

Bisch

[dbd870]

I shoot 45# bows and 1916's fly great with 125gr heads. 29.5" arrows. I may play with some 2016's and heavy heads in the off season.