Bow quiver fletch cover spreader?

[SuperK]

Does anybody make "a spreader" that you can put into your fletch cover on your bow quiver to keep it open so it doesn't mash your feathers and/or have you made something that does the same?  Any info or ideas would be appreciated.  I'm thinking about using a big cable tie.  Hopefully it will have enough "strength" to stay in a circle shape. Thanks

[Hot Hap]

Stainless steel worm clamp?-might be too heavy-Hap

[double eagle]

A cable tie is my preferred method. They are light, cheap, and hold form well.  Easy to apply in many ways.

[tim roberts]

Heavy monofilament. It can be sewed right into the hem...
Thanks,

[Pat B]

I never worried about it and never had the problem.

weedeater line is what I used.

 

 

[Mr. fingers]

I used a heavy duty zip tie to hold the top of my leather back quiver open. I'm sure it would work well for a fletch cover. Put it together get it to the size you want. Trim of the excess. Then wrap a small piece of duct tape in front of the eyelet  so it cannot be fed through anymore.
Good luck

[PeteA]

I just put week wacker line in my 3 Rivers Fletching Cover as suggested by Arrow30. It's perfect, 100x better!

[58WINTERS]

speedometer cable core if you can still find it. comes in .130 .150 and .187 diameter. Truck parts houses/dealers for .150 & .187 car parts houses NAPA etc. for .130
58

[jcs271]

Heavy weed whacker line, cheap and tough!