3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: 1 [2]   Go Down

Author Topic: fletching glue  (Read 999 times)

Offline Snow Crow

  • Trad Bowhunter
  • **
  • Posts: 72
Re: fletching glue
« Reply #20 on: December 30, 2015, 10:23:00 AM »
E6000 ($3.00 for 2 oz tube).  Similar formulation to Goop adhesives; waterproof, flexible in cold, excellent adhesion to carbon, aluminum, and wraps, easy cleanup.  Only drawback for me is 15 minute clamp cure time.
Logged
Wanted:  Crow willing to fly into my arrow.  Blind, deaf and dumb preferred.  Mute a bonus.  One wing would be good.  No legs.  With vertigo...

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: fletching glue
« Reply #21 on: December 30, 2015, 03:26:00 PM »
Loctite superglue is the best I've found. 20 seconds per feather to fletch an arrow which is faster than fletch tape when you consider the time it takes to cut and apply the tape. Works on carbon and aluminum. I've never had a problem with feathers coming loose like i did with fletch tape and its way faster than npv and fletch tite
Logged
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Offline M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3014
Re: fletching glue
« Reply #22 on: December 30, 2015, 05:40:00 PM »
Saunders NPV glue for everything as I use water based Polycrylic to cover my cresting and wraps or Fletch Laq.
Got tape but have not tried it agian. I have seen tape turn to goo on alum arrows from the 100+ temps here.
Logged

Offline Sirius Black

  • Trad Bowhunter
  • **
  • Posts: 1404
Re: fletching glue
« Reply #23 on: December 30, 2015, 06:13:00 PM »
Bearpaw glue. Kustom King carries it.
Logged
Wisconsin Bowhunters Association - Life Member

Offline thunder1

  • Trad Bowhunter
  • **
  • Posts: 614
Re: fletching glue
« Reply #24 on: January 02, 2016, 04:04:00 PM »
Try fletch tape it works.
Logged
No man ever stood so tall as when he stooped to help a child

David

Offline fnshtr

  • Trad Bowhunter
  • **
  • Posts: 2631
Re: fletching glue
« Reply #25 on: January 02, 2016, 04:56:00 PM »
Gorilla Super glue /shock for carbons.
Logged
56" Kempf Kwyk Styk 50@28
54" Java Man Elkheart 50@28
WVBA Member
1 John 3:1

Offline bucknut

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 913
Re: fletching glue
« Reply #26 on: January 02, 2016, 05:06:00 PM »
I use Loc Tite super glue with 1 drop every 3/8 to 1/2 inch and put NPV on the ends and this is by far the best combo I've come across. It is both fast and strong! Used Duco, tape, Platinum and NPV prior to this. NPV is the best if time isn't an issue.  Just my opinion though.
Logged
Whom virtue unites death cannot separate.

Offline FJTOYMAN

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 241
Re: fletching glue
« Reply #27 on: January 02, 2016, 05:08:00 PM »
Depends on what you are glueing.
I use duco on wood arrows with an oil base finish.
Fletch tite platinum on carbon and aluminums with Acry-lac finish.
Saunders NPV or Fletch time platinum on bare aluminum and carbon. Always clean the glueing surface of the shaft with denatured alcohol and then be carful not to touch it with a bare hand.

I've tried the tape in the past. It works great on wraps but seamed to get soft in hot weather. Im not sure if it was the tape or the wrap that was softening.
Hope this helps
Logged

Offline blacktailchaser

  • Trad Bowhunter
  • **
  • Posts: 378
Re: fletching glue
« Reply #28 on: January 02, 2016, 06:25:00 PM »
YEAH,i guess i should have said wooden shafts..that might have help..DUHHHHH..
Logged

Offline Frank V

  • Trad Bowhunter
  • **
  • Posts: 1183
Re: fletching glue
« Reply #29 on: January 02, 2016, 07:49:00 PM »
I only use wood & just build a few arrows for myself, I use Duco,
Logged
U.S.A. "Ride For The Brand Or Leave."

Offline Steve Jr

  • Trad Bowhunter
  • **
  • Posts: 1876
Re: fletching glue
« Reply #30 on: January 02, 2016, 11:24:00 PM »
X3 what Bisch said    :thumbsup:
Logged
Steve Jr


Stalker Coyote FXT LB 58" & 48#@26"
Compton Traditional Bowhunters Life Member

Offline Thumper Dunker

  • Trad Bowhunter
  • **
  • Posts: 3960
Re: fletching glue
« Reply #31 on: January 03, 2016, 12:05:00 AM »
Super glue for all of it. Tape like others said gets mushy in dry hot weather 95 and up.
Logged
You can hop but you can't hide.
If it was not for rabbits I would never get a buck.
Yip yipahooooo yipyipyip.

Offline 1flyfish

  • Trad Bowhunter
  • **
  • Posts: 202
Re: fletching glue
« Reply #32 on: January 03, 2016, 02:43:00 PM »
Duco or Loctite gel for me never had any issues.
Logged
JD Berry Morningstar
Howard Hill Tembo
McBroom ASL
"Keep em flying straight"
Pages: 1 [2]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©