3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Hill and aluminum  (Read 954 times)

Online Vesty

  • Trad Bowhunter
  • **
  • Posts: 457
Hill and aluminum
« on: January 21, 2016, 07:50:00 PM »
I normally use douglas fir with my N.M. classic which can be described as a Hill style longbow but am thinking about trying some Easton Legacy shafts. If you shoot aluminum from your Hill bow, please respond.

Online Hermon

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2127
Re: Hill and aluminum
« Reply #1 on: January 21, 2016, 07:52:00 PM »
I do from time to time.  Nothing wrong with it, and they shoot great.

Online M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3026
Re: Hill and aluminum
« Reply #2 on: January 21, 2016, 07:57:00 PM »
I did most of the time. I shot 2018 and 2020 from my 65# Pete George LB. Unless you leave the shafts real long you will need to spine down because bow shelf is cut this side of center. Arrow needs more bend to get around the riser. These are my experiences yours may vary. I would suggest a test pack of shafts from 3Rivers and test point pac as well.

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Hill and aluminum
« Reply #3 on: January 21, 2016, 09:48:00 PM »
I shoot a 2016 with a 145 gr. point out of my 55# Hill.The spine just fits my bow,I have shot carbons and woods too out of my Hill.I like the looks and they way they fly,and they are some old Autumn Orange arrows.Shot 2020's out of a 65# Hill I had.

Online 58WINTERS

  • Trad Bowhunter
  • **
  • Posts: 639
Re: Hill and aluminum
« Reply #4 on: January 21, 2016, 10:27:00 PM »
HH wes spec 2016 29 bop = 350 grain no point works well with 200 or 250 gr up front 5-1/2 3 fletch 55@28  I draw 27-27-1/2
58

Offline Jim Picarelli

  • Trad Bowhunter
  • **
  • Posts: 598
Re: Hill and aluminum
« Reply #5 on: January 21, 2016, 11:08:00 PM »
I mostly shoot aluminum's off my ASL's.
67" Hill Tembo, 50@27
67" Hill Half Breed, 53@27
66" Hill Redman, 48@27
66" Hill Cheetah, 55@27
66" Hill Big Five, 50@27

Offline Joe2Crow

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 328
Re: Hill and aluminum
« Reply #6 on: January 22, 2016, 06:11:00 AM »
I, too, shoot mostly aluminums from my hill style bows. Most of my bows pull 50-55 pounds and I use 2016s, 2114s and sometimes 2018s with a little more weight up front.

Online Vesty

  • Trad Bowhunter
  • **
  • Posts: 457
Re: Hill and aluminum
« Reply #7 on: January 22, 2016, 08:05:00 AM »
How about noise? I'm a quiet freak. I know how silent wood arrows are. Would I be right in assuming that the key with aluminum would be weight? Heavy=quiet?

Online Tajue17

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2820
Re: Hill and aluminum
« Reply #8 on: January 22, 2016, 08:26:00 AM »
aluminum's are fine just noisy in a back quiver and be careful when nocking an arrow (or accidentally rolling string when drawing back) and making sure it doesn't hit the riser,,,some of my hunting bows have that stick on camo plate material all the way up the side of the riser to avoid any of those mishaps.
"Us vs Them"

Offline mike g

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 2301
Re: Hill and aluminum
« Reply #9 on: January 22, 2016, 09:19:00 AM »
I use 2016 Legacy's cut to 29" bop w/125 up front.
   Bow is a Big 5 49# @ 29"
And I use the Easton black 500's cut to 29" bop w/125 up front.
 With my Tembo no shelf, 45# @ 29"
To help with the noise, Keep the points tight.
"TGMM Family of the Bow"

Offline Tradcat

  • Trad Bowhunter
  • **
  • Posts: 873
Re: Hill and aluminum
« Reply #10 on: January 22, 2016, 02:31:00 PM »
I've had success shooting 2018's out of a 64" Robertson Purist Longbow. Had to put Velcro or mole skin across the entire sight window to reduce the noise while hunting.

Offline Sirius Black

  • Trad Bowhunter
  • **
  • Posts: 1404
Re: Hill and aluminum
« Reply #11 on: January 22, 2016, 03:14:00 PM »
I've used 2114's from a 51@28" Wesley Special I once had.
Wisconsin Bowhunters Association - Life Member

Offline fling

  • Trad Bowhunter
  • **
  • Posts: 215
Re: Hill and aluminum
« Reply #12 on: January 22, 2016, 03:45:00 PM »
I shoot a 54# NM Baraga and use 2213 145grain field point/broadhead. 29" with 3 4" parabalic feathers. Total weight is around 500grains. It's my go to arrow for my Baraga.

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: Hill and aluminum
« Reply #13 on: January 22, 2016, 05:44:00 PM »
I've shot 2016, 2018, 2117, from different Hill  bows since 1988.

B.C. Before Carbon!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©