3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Brace height suggestions  (Read 358 times)

Offline DSP

  • Trad Bowhunter
  • **
  • Posts: 7
Brace height suggestions
« on: January 30, 2016, 01:50:00 PM »
Not sure if this is the right forum, but hopefully someone here will be able to help. I was recently given an old 58", 45#, 28" draw length signal recurve. The bow is in beautiful shape but has no string. I haven't shot a recurve in 15 years, so I figured this would be a good opportunity to get back into traditional archery. Am I correct in thinking that I should look for a 54" dacron string? Now for my original question, does anybody have any idea what the original brace height range was for these bows? I realize I will need to fine tune it for stretch, noise, etc, I'm just looking for a good starting point. Unfortunately, I don't have any traditional shops anywhere near me so I'll have to order everything I need online. Any help you guys can provide will be greatly appreciated.
Thanks,
Dan

Offline AZ_Longbow

  • Trad Bowhunter
  • **
  • Posts: 390
Re: Brace height suggestions
« Reply #1 on: January 30, 2016, 02:43:00 PM »
I believe sting length is 3" shorter than the length of the bow to start, I may be wrong though. it may be 2.. or that might be for a longbow. and for brace height 8" or so to start and twist up from there. youtube the black widow videos they give a lot of great instructions.
"There's only two things an arrow wants to do, it wants to fly and it wants to hit its target. It's in its very nature. Don't over think it."

Offline UMLarcher

  • Trad Bowhunter
  • **
  • Posts: 67
Re: Brace height suggestions
« Reply #2 on: January 30, 2016, 03:19:00 PM »
Per 3Rivers - "If you don't know the length of your bow string a good rule of thumb is that longbow will take a string 3" shorter than they are marked and a recurve takes a 4" shorter bow string."
Keep Calm & Carry On

Offline Blackhawk

  • Trad Bowhunter
  • **
  • Posts: 3863
Re: Brace height suggestions
« Reply #3 on: January 30, 2016, 07:25:00 PM »
I believe Ben Pearson made the Signal which is the same as their Cougar, and the Signal brand was for a large retailer.

For a dacron flemish string, I choose one 4" shorter since they tend to stretch a bit more than endless strings.  Of course, brace heights are a personal thing depending on your shooting technique, arrow flight, and how quiet you can make it.  

I would start with a brace of 7.5" and twist up until it suits you.  My guess is the bow will be best around 8".

Good luck...
Lon Scott

Offline DSP

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Brace height suggestions
« Reply #4 on: January 30, 2016, 09:22:00 PM »
Thanks for the information guys, I appreciate it. The first bow I learned to shoot was my dad's old 45# Ben Pearson Raider(pretty sure that was the model). As far as I know he still has it shoots it occasionally. I have a lot of fond memories of heading out to our back field, recurve in hand for the weekly "Budweiser Shoot-off."

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©