Carbon Express Heritage ?

[jt85]

Can you get 100 grain brass inserts for the Heritage shafts?

[yeager]

Try 3Rivers. I've bought both 50 & 100 grain inserts from them in the past.

I don't shoot CE, but just looked on 3Rivers and CE websites, and it does not appear that they do make 100gr inserts for the Heritage shafts. That really seems odd to me that they would not make them though.

Bisch

[jt85]

I haven't been able to find them either but I'm with you Bisch I sure would have thought they would.

[Steelhead]

I have both 50 grain and 100 grain.THey are 5/16th.

I might have got them from Big Jim.I cant remember.Its been awhile since I purchased them.

If they are 5/16" diameter, then any 5/16" brass insert should work.

Bisch

[daveycrockett]

Originally posted by Bisch:
If they are 5/16" diameter, then any 5/16" brass insert should work.

Bisch

They are and will. Buy mine from Braveheart on here.

[jt85]

Great thanks

[**DONOTDELETE**]

Originally posted by jt85:
Can you get 100 grain brass inserts for the Heritage shafts?

I used to use the CE Herritage shafts a lot and i had to mill some of the brass inserts i had down to fit. i'd just chuck a field tip into my drill press and use a file to size them down enough.

the ones at 3 rivers says the 50 grain inserts Fits shafts with ID of .2445". These commonly are Carbon Express shafts like the Heritage.

[MnFn]

I got them from 3Rivets. No problem with them in CE150, CE250.

[cacciatore]

The ones I bought from 3 Rivers are 5/16 and they fit both Gold Tip and Eritage,250-350

[Terry Lightle]

We have some
Terry

[jt85]

Terry I'll be giving you a call in the next couple days. I'm in need of feathers also

[3R Shooter]

http://www.3riversarchery.com/brass-arrow-point-inserts.html

We have a set 50 grain brass insert for Carbon Express, then our 100 grain fits all 5/16" shafts. (Easton, Beman, Gold Tip, and Carbon Express)

[JRY309]

The standard 5/16" brass insert will work in the 150,250 and 350's.They  don't make brass inserts for the 75 and 90 Heritage,smaller diameter.Some brass insert don't always fit perfect.When I use the heavier inserts I check the fit,if too large I just mount them on a blunt tip in my drill and spin&file to fit.

[J. Cook]

Yup - generic 5/16 brass inserts work perfectly.

[Pivo]

As stated above, the brass inserts for gold tips, .246 diameter, will not fit in the old heritage (dark) shafts. Not sure about the new ones. I've had to chuck some up and take off a hair.  CE used to be .244 I think