Just received a replacement bow from Bear Archery. 40# Grizzly. Can't say enough about the customer service. I ordered some 600 spine GT Blems from Big Jim, gave them a black and white marble dip from the how to section on trad gang. Two white, one black 5" shield cuts. Awesome looking arrows. I had planned on using 200 grain Cutthroats. My full length (30") bare shaft with 200 grain point was showing weak, and a little nock high. put a 125 gr on and showed barely stiff and more nock high. Went down to the only archery shop around to get them to help me cut them down so they would fly well with the 200 grain points. Well lets just say that I am never going to step foot in that place again. First thing they said was my arrows are to weak, not straight enough, and that who ever painted and crested them did a terrible job. I got out of there before they could piss me off any more. Got home and put the 150 grains on and bare shafted as straight as I could ask for, little nock high, but dead straight. Shot some fletched arrows through paper and got bullet holes at 6 and 15 feet. over all weight is 430 grains. Looks like I need to find a good 150 Grain broad head. Wanted to thank every one on the sight who gave me advice on arrows, Bear contacts, and general knowlege. Looking foward to turkey season.