Where can can I get 75grain brass insert?

[aim small...release]

Is there anywhere I can get 75 grain brass inserts for gold tip trad arrows. Having trouble. Thanks for any help. Local archery shop ran out andto cant order anymore. Brandon

[Hermon]

75?  All I've ever seen before were 50 & 100 grain.

[aim small...release]

Ok that may be so. That's why I was asking

[Sirius Black]

The only one I know of is the 75gr HIT insert Easton makes for it's Axis arrows. I think there used to be a 75gr steel insert, but I don't think it is around anymore.

[aim small...release]

Whose got the 100gr?

[DarkTimber]

I've never seen 75 gr inserts for gold tips either but their 50 gr brass insert is threaded on the back to accept their weight modules.  You can get a 20 gr module which would get you to 70 gr and if you need/want to be exactly at 75 gr you can also buy a PDP  5 gr screw to go in the back of the 20 gr module.  Cheaper than changing bbroadheads.

[Bill from NJ]

This place seems to have different types and in 75 grain.

 http://vintagearcheryco.com/shop/index.php?main_page=index&cPath=6

[Terry Lightle]

We have the 100s

[dino]

Cut the back off a 100 to make it 75. There is plenty of brass there. Dino

[dino]

Cut the back off a 100 to make it 75. There is plenty of brass there. Dino

[BWD]

Originally posted by dino:
Cut the back off a 100 to make it 75. There is plenty of brass there. Dino

Done the same a few times...it's not that hard.
Cut a little off, weigh it, shorten as needed by removing length/weight using a belt sander.

If you want 75gr foe a GT arrow, you are going to have to cut 25gr off the back end of a 100gr insert. If I were you, I would pull one out of one of my arrows and weight it. I'll bet my bottom dollar it is either 50gr or 100gr.

Bisch

[jt85]

Correct me if I'm wrong but I believe GT makes a 50 grain insert and a 25 grain weight that will screw into the back of the insert.

[IndaTimber]

How many do you need? I have a few 100 grain GT inserts laying around I will ship to you. Just need an address.

Originally posted by jt85:
Correct me if I'm wrong but I believe GT makes a 50 grain insert and a 25 grain weight that will screw into the back of the insert.

BINGO!!!!! This is your solution! I can't believe I forgot about this, as long as I shot GT shafts. Yes, you can get the GT  50gr brass insert, and the 25gr add on weight . They sell a wrench that goes in from the nock end of the arrow so you can change weights when needed.

Bisch