What glue for fletching wood shafts?

[J. Cook]

First time making wood arrows... which glue do I need for fletching the wood shafts?  I'm not a fan of tape - not at all.  I've use Gorilla super glue on carbons for years with great results.  I'll be using wipe on poly as the sealER on the shafts.

[ranger 3]

Duco

[bowhuntingrn]

Duco works well if you can find it, but it is slow. Same for the Saunders NPV (love this stuff, but slow). I personally have been using the same Loctite Ultragel Super Glue that I use on carbons and it seems to be holding up fine (I do put a spot of the NPV at either end of the feather). You could likely use the same Gorilla glue you've been using. Just for the record, I also use Minwax wipe on poly (oil based / gloss).

[Pine]

I have had good results with the Gorilla Super Glue .
But I prefer NVP .
The Super Glue can make a cloudy haze along the feather but it is still a strong bond .

[Shadowhnter]

All ive used is duco.

[Gordon Jabben]

Depends on the finish.  Duco works well with poly or gasket lacquer.

[BAK]

I've used fetch tite for nearly 50  years and never had a failure.

[ranger 3]

Ace hardware has Duco

[Sam McMichael]

I have had good luck with Duco, NPV, and Fletch Tite.

[stagetek]

I've had excellent results with both Fletch-Tite and Saunders NPV. prefer the latter.

[Crittergetter]

I switchd to fletch tape and won't look back!

[Bud B.]

For wood arrows and a poly finish, Duco works best for me.

[Wild Bill MCP 808]

Fletch tite works for me. Been using it for years no problems.

Duco for me, but I guess as mentioned above, the finish on your shaft could influence how well a particular glue works.

Bisch

[JR Belk]

super glue. Never had any issues on poly

[Dave Lay]

another Duco user but its gotten harder to find
     Ace hdwe is about the only place ive found it lately