Author Topic: Dwyer Dauntless - Hows it cut?? (Read 360 times)

slayer1 · « **on:** January 13, 2017, 12:56:00 PM »

Does anyone know if the Riser of a Dwyer Dauntless is cut 1/8" past center?

NBK · « **Reply #1 on:** January 13, 2017, 02:25:00 PM »

1/8th before center I believe not past.

slayer1 · « **Reply #2 on:** January 13, 2017, 03:37:00 PM »

So when I use Stu's arrow spin calculator should I use 1/8 or -1/8"

NBK · « **Reply #3 on:** January 13, 2017, 04:12:00 PM »

Believe it's 1/8.

NBK · « **Reply #4 on:** January 13, 2017, 04:18:00 PM »

Our bows are the same specs. Everyone is different but I shoot 500 spine axis arrows with 50 gr inserts and 200 gr points cut to 30" and they fly well. I also shoot 60/65 Surewoods cut to 29" BOP with 160 gr heads. FYI.

slayer1 · « **Reply #5 on:** January 13, 2017, 06:18:00 PM »

Thanks Mike. I draw to 29.5. So I ended up with GT 5575's 400 spine - 200 grain tip with 20 grains screwed into the back. Cut to 30.5' Total arrow weight 542. They fly like darts. Stu's calculator was all over it.

News:

Author Topic: Dwyer Dauntless - Hows it cut?? (Read 360 times)

slayer1

Dwyer Dauntless - Hows it cut??

NBK

Re: Dwyer Dauntless - Hows it cut??

slayer1

Re: Dwyer Dauntless - Hows it cut??

NBK

Re: Dwyer Dauntless - Hows it cut??

NBK

Re: Dwyer Dauntless - Hows it cut??

slayer1

Re: Dwyer Dauntless - Hows it cut??

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS