Quality nocks ?

[Greybark]

Over the years has several nocks break and cause a Dry Fire . The past two years had three up I/16 in from the string saddle . No arrow strikes just failure of the Marco white plastic .
   Would pay anything for toughest nocks available to avoid failures !
   Cheers from the Land that has Everything except the Stanley Cup .

[McDave]

Originally posted by Greybark:
The past two years had three up I/16 in from the string saddle .

Pardon my ignorance, but what does this mean?

[Charlie Lamb]

Get rid of the Marco nocks and use Bohning.

[T Mowery]

For a push in Nock,Beman S Nock. They are the same as the Old Easton S Nocks. None better IMO! For a glue on,cant say!

[Gator1]

Is there something I should look for with Marco Snap Nocks??

I like the snap design of these.  

Thank you Charlie

[Greybark]

Good morning All , thanks for the replys . McDave , I ment slightly up the side of the nock above the saddle . Normaly a failure would happen at that saddle and not above it . Note two of these failures occurred from a new batch of nocks .
   Cheers , still no Stanley !

[Greybark]

Should add that I shoot three under . Cheers

[threeundr]

I second what Charlie said, Bohning.

[Roy from Pa]

X's 3 on Bohning nocks.

Back too Back Stanley Cups here in Pittsburgh.. It's easy..      

[V I Archer]

I have long used Mercury speed noks.  I liked the old Bjorn noks for a time, but have trouble finding them now.

Bohning makes a quality product though.

[Sirius Black]

Mercury Speed nocks are great, but I think they had a quality issue not long ago. I hope that was resolved.

[Woodpuppy]

I’m partial to Easton supernocks and the gold tip nocks, though they are looser on the string that the Eastons.

[Stumpkiller]

Bohning classic.

If you can just keep from smacking them with the next arrow they hold up great.

[monterey]

I've never had a bohning classic fail.

[Greybark]

Thanks all for taking the time to post , very informative!
  Cheers , and still no sight of Stanley !

[NorthernArcher]

It has been many years since I used mercury speed nocks, but I don't recall ever having an issue with them.

I have been using Mercury Classic Nocks for several years now, and they are fantastic. I've never had an issue with them.

[Stumpkiller]

At some point Mercury Speed Nocks were discontinued by Allied.  I think someone else has since picked them up.

I still have some 11/32", but lately taper my shafts down to 5/16" at the crown.