Author Topic: Brace height on a Palmer T/D (Read 1671 times)

Stalker58 · « **on:** February 17, 2007, 09:31:00 AM »

I just picked up a used Palmer T/D single carbon.
It's in great shape,I got a sweet deal.
Does anyone know what the brace height should be?
Just to put me in the ballpark.
Thanks

ksbowman · « **Reply #1 on:** February 17, 2007, 05:18:00 PM »

I shoot mine at 7 7/8",but it shoots fine on down to 7 5/8" and still stays quiet.

SpankyNeal · « **Reply #2 on:** February 17, 2007, 05:31:00 PM »

My 60" shoots best at 7 3/4". The range from my manual is 7 1/4" to 7 3/4" for the 60" bow. Thats just the recomended range, your bow may shoot better longer or shorter. Have fun!

Ken

Stalker58 · « **Reply #3 on:** February 17, 2007, 08:07:00 PM »

Cool,I set it up at 7-3/4" and it shoots great.
Thanks guys.

Tajue17 · « **Reply #4 on:** March 07, 2007, 04:39:00 PM »

yup my 60" palmer classic likes to be at 7 3/4--> the limb tips on all palmers dance around a little after the shot but the bow feels fine to the person shooting it.

dlhamblin · « **Reply #5 on:** March 13, 2007, 11:51:00 AM »

What length of Palmer are you shooting? I have a 64 in that I set up at between 8 and 8 1/4. I have a long draw so a little higher brace height helps arrow flight.

I had to experiment a lot initially but have been shooting it at this setting with good success.

Suggest you do the same for best results.

News:

Author Topic: Brace height on a Palmer T/D (Read 1671 times)

Stalker58

Brace height on a Palmer T/D

ksbowman

Re: Brace height on a Palmer T/D

SpankyNeal

Re: Brace height on a Palmer T/D

Stalker58

Re: Brace height on a Palmer T/D

Tajue17

Re: Brace height on a Palmer T/D

dlhamblin

Re: Brace height on a Palmer T/D

Users currently browsing this topic: