I seem to bareshaft at least twice a week...usually after I have shot too much and things are starting to fall apart...anyway...I have been shooting the tradonly .500 and the GT 15/35, both are cut to 29 3/4. The .500 seems a little stiff and the GT a little weak, the GT is also 60 grains lighter. Through BH, side plate and point weight, I don't have a problem getting the fletched sets to group together,(GT does have some flight wiggle), I have my nock point @ 3/4+ and still get nock low w/ the .500,(groups @ 2 o'clock of my fletched) ...then I shoot the GT and it says nock high,(BS about 12in low @20),??? I am left handed, gap shoot 3 under w/ 2 brass nocks, #45/46 at my 28 3/4 draw zipper longbow, bow is tillered for 3 under. Thanks