New to Wood Arrows - need tuning advice

[Pac'em out]

I'm shooting cedar shafts for the first time and trying to get them to tune.  I'm shooting bare shaft and I've cut them down a 1/2" at a time.  I've got them sticking straight into the target, left to right, but I can't get rid of a nock high.  I've moved the nock point all over the place with no effect.  Any ideas?

[Don Stokes]

Try going higher- you may be low and rebounding off the shelf. The sweet spot can be pretty narrow, so be sure you haven't missed it. Shooting a fletched shaft might show you whether you're actually high or not- a fletched shaft will almost always kick with a low nocking point from the fletching hitting the shelf, but can look good with a high nocking point.

[Pac'em out]

Yeah, I'll fletch one up and give it a try.  Thanks for the tips.

[robtattoo]

Check this out!

[eric-thor]

ya i think you are fine . just fletch them up .than play with noc point . i use 5.8 above center.

[eric-thor]

i meen 5/8