Shooters Forum

Contribute to Trad Gang
Become a Trad Gang Sponsor



Author Topic: i did a test yesterday.  (Read 499 times)

Offline recurvecody

  • Trad Bowhunter
  • **
  • Posts: 167
i did a test yesterday.
« on: June 08, 2010, 01:09:00 PM »
i purchased a 55# @28 recurve and couldn't figure out the way my gamegetter 400's wasn't flying right. until i tested my drw length last night. i'm only pulling back to 26 inches,so my question is what do you guys think im pulling back in poundage?
pick a spot stupid!

Offline Northwest_Bowhunter

  • Trad Bowhunter
  • **
  • Posts: 553
Re: i did a test yesterday.
« Reply #1 on: June 08, 2010, 01:15:00 PM »
Maybe 49# - 50# give or take.
Michael

** Poppa can we go out and shoot bows and arrows? **  My boys

Offline recurvecody

  • Trad Bowhunter
  • **
  • Posts: 167
Re: i did a test yesterday.
« Reply #2 on: June 08, 2010, 01:24:00 PM »
than that why my arrows aren't right then
pick a spot stupid!

Online rastaman

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 7825
Re: i did a test yesterday.
« Reply #3 on: June 08, 2010, 01:32:00 PM »
Too stiff most likely.  But you need to give more information.  How long are your arrows ?  Is your bow cut to center?
What kind of weight do you have up front (fieldpoint & insert)?
Also, what do you mean when you say your arrows aren't flying right?
TGMM Family of the Bow

                                                   :archer:                                               

Randy Keene
"Life is precious and so are you."  Marley Keene

Offline recurvecody

  • Trad Bowhunter
  • **
  • Posts: 167
Re: i did a test yesterday.
« Reply #4 on: June 08, 2010, 01:36:00 PM »
125gr feildpoint
cut to 27 inche
standerd insert that easton puts in them
pick a spot stupid!

Offline recurvecody

  • Trad Bowhunter
  • **
  • Posts: 167
Re: i did a test yesterday.
« Reply #5 on: June 08, 2010, 01:42:00 PM »
when i shoot my beman 500's shoot fine
pick a spot stupid!

Offline Northwest_Bowhunter

  • Trad Bowhunter
  • **
  • Posts: 553
Re: i did a test yesterday.
« Reply #6 on: June 08, 2010, 01:58:00 PM »
Are your beaman cut to 27" also?

How are your Gamegetters not flying right?
Michael

** Poppa can we go out and shoot bows and arrows? **  My boys

Online rastaman

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 7825
Re: i did a test yesterday.
« Reply #7 on: June 08, 2010, 02:00:00 PM »
click here for tuning guide  

Here's some info for you.  The Bemans are closer in spine (probably) to what you need.  i shoot 47 to 49lbs and shoot primarily bemans 500 and GT 35/55 but with more weight up front.  Use the guide above to play around with your arrows and that should get you closer to where you want to be.  Good luck!
And what Michael said....how are they not flying right?
TGMM Family of the Bow

                                                   :archer:                                               

Randy Keene
"Life is precious and so are you."  Marley Keene

Offline recurvecody

  • Trad Bowhunter
  • **
  • Posts: 167
Re: i did a test yesterday.
« Reply #8 on: June 08, 2010, 02:35:00 PM »
yes beman are cut to 27 inches also,when i shoot my bemans they look like a bullet straight they don't wabble or anything.my 400's wiggle curve just don't look right when in flight.
pick a spot stupid!

Offline Northwest_Bowhunter

  • Trad Bowhunter
  • **
  • Posts: 553
Re: i did a test yesterday.
« Reply #9 on: June 08, 2010, 02:41:00 PM »
Spine could be the issue, but I also wonder if (I am assuming you nock under) since the Gamegetter is a thicker aluminum shaft then the Beaman ICS carbon, could you be getting a bounce off your shelf (do you shoot off your shelf?).  If it looks like you are presenting with a "nock high" sort of wobble you might try nocking over briefly and seeing how it flys.

Or I could be totally wrong.
Michael

** Poppa can we go out and shoot bows and arrows? **  My boys

Offline recurvecody

  • Trad Bowhunter
  • **
  • Posts: 167
Re: i did a test yesterday.
« Reply #10 on: June 08, 2010, 03:40:00 PM »
okay, i never thought about the smaller shaft i will try nocking over i will try that.i do nock under.
pick a spot stupid!

Offline Northwest_Bowhunter

  • Trad Bowhunter
  • **
  • Posts: 553
Re: i did a test yesterday.
« Reply #11 on: June 08, 2010, 04:31:00 PM »
Most people do, and you might still be a little nock high but you shouldn't have a lot of wobbling.
Michael

** Poppa can we go out and shoot bows and arrows? **  My boys

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©