3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Frog Gigging  (Read 1422 times)

Offline VA Bowbender

  • Trad Bowhunter
  • **
  • Posts: 629
Frog Gigging
« on: January 27, 2007, 08:37:00 PM »
I know it's still early to be thinking about this but, does anyone gig frogs with their bow?  Has anyone come up with a fork for arrows to gig with?
Bows, Broadheads & Backstraps

Offline Osagetree

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3512
Re: Frog Gigging
« Reply #1 on: January 27, 2007, 08:41:00 PM »
I do my gigging with a pole,, hate loosing arrows in the dark!

  :biglaugh:
>>--TGMM--> Family of the Bow

Offline adeeden

  • Trad Bowhunter
  • **
  • Posts: 1786
Re: Frog Gigging
« Reply #2 on: January 27, 2007, 08:47:00 PM »
Rubber blunts work well for frogs. They don't bury in the mud near as deep either!
"I would rather be lucky then good, any day!"

Offline foxbo

  • Trad Bowhunter
  • **
  • Posts: 667
Re: Frog Gigging
« Reply #3 on: January 28, 2007, 06:54:00 AM »
Scully's catalog carrys a frog gig arrow. I bought one several years ago and have never used it. It either has three or four prongs.

I have gone out at night and shot frogs with a regular harpoon arrow while using a light. Most of the shots of course blew right thru the frogs, but I still got'em. It works better than a gig mounted on a pole as you don't have to get in as close to the frogs.
N/A

Offline twosheds

  • Trad Bowhunter
  • **
  • Posts: 518
Re: Frog Gigging
« Reply #4 on: January 28, 2007, 07:30:00 AM »
I go giggin about every weekend during the summer months. Never done it with an arrow.
Bob Lee Hunter Recurve 55# @ 29''

Offline Cody Cantrell

  • Trad Bowhunter
  • **
  • Posts: 101
Re: Frog Gigging
« Reply #5 on: January 28, 2007, 09:55:00 AM »
I just made my own points out of close hanger wire and 3/8" copper tubing.  Cut three 3" pieces of coat hanger, hammer one end flat and file it to a barbed pointed end and bend two of them slightly, file several notches around the non barbed endabout 1/2" from the end.  Next cut a 2" piece of copper tubing, place the three prongs about 3/4" in from one end with the two bent prongs on the outside and the straight one in the middle.  Hammer the end of the copper tubing flat pinching the prongs in place, then solder them in and your good to go.  
Having said this the ones that I made ended up very heavy and tended to just blow through the frog but they did hold him to the ground while I retrieved him and my arrow.  Good luck!

Cody
Your wife will accustom herself to shavings and scraps of feathers on the rugs.-Saxton Pope

Offline 2fletch

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 1797
Re: Frog Gigging
« Reply #6 on: January 28, 2007, 11:16:00 AM »
As a kid I shot frogs with just a target arrow, and have done the same just several years ago. The best way is to get in the water and wade the pond, creek, or whatever you're hunting in. If you don't have a buddy holding the light then you need to learn to hold the light at the same time you're shooting. (That's the tricky part.) Once you've made the shot it's time to move quickly to the frog. Even though you have pinned him to the bank, he'll try to get off the nock end of the arrow.

It's great sport, and if you shoot at close range, it's an efficent way to frog hunt. I prefer it to using a rifle or frog gig.

Good Luck VA Bowbender.

2fletch

Offline VA Bowbender

  • Trad Bowhunter
  • **
  • Posts: 629
Re: Frog Gigging
« Reply #7 on: January 28, 2007, 05:16:00 PM »
All good advice.  I think the rubber blunt is probably my best bet.

Thanks everyone.
Bows, Broadheads & Backstraps

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©