INFO: Trad Archery for Bowhunters



Author Topic: Toothpaste and baby wipes .....  (Read 463 times)

Offline jcar315

  • Trad Bowhunter
  • **
  • Posts: 3843
Toothpaste and baby wipes .....
« on: April 14, 2009, 08:43:00 PM »
I have been reading up on BD's how to thread. I have gotten brave enough to use some baby wipes and toothpaste on a couple of bows and the results are fantastic (sorry but no before and after pics) I am getting some acetone tomorrow to remove some tape residue and some wax. Did have one question: is there any way to "restore" the white part in front of the grips on a Kodiak? It isn't pure white like I see on others. Any suggestions? Thanks as always John
Proud Dad to two awesome Kids and a very passionate pig hunter.

Right handed but left eye dominant.

Proud to be a Native TEXAN!!!!!

"TGMM  Family of the Bow"

Offline Horney Toad

  • Trad Bowhunter
  • **
  • Posts: 1166
Re: Toothpaste and baby wipes .....
« Reply #1 on: April 14, 2009, 10:30:00 PM »
Acetone works great at removing stuff, the only problem is that it will remove the finish if you rub too hard. Try rubbing a little on the white overlay but take it slow. I usually use charcoal lighter fluid for cleaning gunk off of bows, it is milder than acetone. Good luck.

Offline Rick Enos

  • Trad Bowhunter
  • **
  • Posts: 548
Re: Toothpaste and baby wipes .....
« Reply #2 on: April 15, 2009, 08:55:00 AM »
I use a product called Lift-Off.Home-Depot sells it.I used it to get the tape & gunk off my bows.I cleaned a Grumley that had tape from top to bottom & it did the job & left the finish intact.Also I've tried everything to clean up ragged out recurve bows & by far orange hand cleaner works better than anything else I've tried.

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Toothpaste and baby wipes .....
« Reply #3 on: April 18, 2009, 12:06:00 AM »
I've used Oven Cleaner on my boats for years. Just don't let it sit. Takes off tape and gunk, black marks, etc. Polish it up afterwards.

Acetone is a little hard on things. I've seen it tear up fiberglass at times.

sam

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©