INFO: Trad Archery for Bowhunters



Author Topic: Help identify a bow  (Read 714 times)

Offline Richard Cook

  • Trad Bowhunter
  • **
  • Posts: 12
Help identify a bow
« on: June 23, 2009, 02:03:00 AM »
Well I was refered here by orygun over on JHO for some help identifying a bow that was given to me.

 I had been looking for a inexpensive recurve for a bowfishing rig. So I spoke with a older gentalman in town the shoots trad only and has done so for years, I asked if he might have an old spare boow laying around he might be willing to part with for a fair price. A few days later he brings this old painted bow into the store where I work It was set up with 45# limbs and also had a set of 65# limbs for it. I liked what I saw and asked what he wanted for it and he replied with nonthing as he had others but said I might want to take the paint off of it. Couldn't believe his generosity, well anyway I stripped the paint off sanded it down and now have a few coats of linseed oil on it, needless to say i'm stuned. The riser has 2430 WHD and 22147 on it and the limbs are similary marked with mod#s and poundages. Does anyone have any info on who might have been the manufactuer and about when it was made or any other info about it.


Richard

Offline Richard Cook

  • Trad Bowhunter
  • **
  • Posts: 12
Re: Help identify a bow
« Reply #1 on: June 23, 2009, 02:08:00 AM »
Oh heres a few pics
 
 
 
 
 

Offline joe skipp

  • Trad Bowhunter
  • **
  • Posts: 4314
Re: Help identify a bow
« Reply #2 on: June 23, 2009, 03:16:00 AM »
Looks like a martin T/D.....
"Neal...is this heaven?" "No Piute but we are dam close". Top of the Mtn in Medicine Bow Nat Forest.

Offline Joseph

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 855
Re: Help identify a bow
« Reply #3 on: June 23, 2009, 05:50:00 AM »
It is a Martin takedown.  There should be two ball bearings in the handle that fit into the dimples in the underside of the limb butts.
"Politicians are like diapers, they need to be changed often and for the same reason"

Offline the ASSASSIN

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Help identify a bow
« Reply #4 on: June 23, 2009, 06:54:00 AM »
neat old bow

Offline ckruse

  • Trad Bowhunter
  • **
  • Posts: 728
Re: Help identify a bow
« Reply #5 on: June 23, 2009, 10:29:00 AM »
Yep, it's the original Martin takedown. As Joseph pointed out, they used ball bearings between the riser and limbs. I've got one that is doing bowfishing duty. Kind of cumbersome, but not a bad old bow. They used the riser from the Martin WartHog compound to make these. CKruse
"The lack of machinery puts you closer to the act- an act that is ethical, good, right, and correct."- CKruse

Offline Richard Cook

  • Trad Bowhunter
  • **
  • Posts: 12
Re: Help identify a bow
« Reply #6 on: June 24, 2009, 09:32:00 PM »
Thanks for all the replies, any idea about when these were produced?

Richard

Offline R.V.T.B.

  • Trad Bowhunter
  • **
  • Posts: 602
Re: Help identify a bow
« Reply #7 on: June 25, 2009, 10:00:00 AM »
I bought mine new in 1986 or 87. I was shooting heavy bows at the time and ordered a 75 pounder.  The shop I ordered mine from (Barefoot Archery?) said they were marked 70 plus on the limbs and you really didn't know what you got.  When it came in mine was marked 70 + and pulled 86 at 28".

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Help identify a bow
« Reply #8 on: June 25, 2009, 02:57:00 PM »
Better late than never...MARTIN

It has the classic Damon Howatt lines.
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©