INFO: Trad Archery for Bowhunters



Author Topic: Grizzly Makeover  (Read 583 times)

Offline bctgrad

  • Trad Bowhunter
  • **
  • Posts: 137
Grizzly Makeover
« on: October 30, 2009, 08:02:00 AM »
Searching my local Craigslist about a month ago I came across an ad for a “Bear recurve” with no additional information.  I responded to the ad and after a few questions were answered discovered that it was a 49# ’66 Grizzly.  The draw weight was a little light, but the seller was only about 5 miles from me and the price was right so I told him I’d take it.  The bow turned out to be a factory camo model and appeared to be in decent condition from my initial quick inspection.  When I got it home and looked closer, I almost regretted buying it.  The edges of the limbs were almost completely stripped of paint and looked like they had been drug behind a truck.  Some of what I thought were scratches started to look more like cracks.  I decided that if I wanted to shoot this bow I was going to have to get the paint off and make sure that everything was ok underneath.  

I started with LT420 on the limb edges and all of the possible cracks.  After it set up I began stripping the paint with acetone and scotch brite pads and finished up with sandpaper.  After everything was stripped and sanded I was shocked to see that all of the scratches actually were scratches and there wasn’t even a single stress crack under the paint.

I ordered a new set of decals from Al Hartford and started applying the wipe-on poly.

This was my third attempt at refinishing a bow (first Bear) and second try at applying decals (first time didn’t go so well).  Big thanks to Al for the great decals and detailed application instructions.  Also thanks to bowdoc for all the “how-to” posts – especially the coin removal thread.

Made a new string and got her strung up but haven’t had a chance to shoot it yet – hopefully this weekend!

Sorry for the poor quality pics.  My wife & daughter are the photographers in the house, I should have had one of them take the pictures.

Before:
 

 

After:
 

 

 

 

 

 

Thanks for letting me share,
Brian

Offline 4runr

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6799
Re: Grizzly Makeover
« Reply #1 on: October 30, 2009, 08:23:00 AM »
Beautiful!

Well done Brian!
Kenny

Christ died to save me, this I read
and in my heart I find a need
of Him to be my Savior
          By Aaron Shuste

TGMM Family of the Bow

Offline mwmwmb

  • Trad Bowhunter
  • **
  • Posts: 764
Re: Grizzly Makeover
« Reply #2 on: October 30, 2009, 08:25:00 AM »
nice job. good looking bow.

Offline Jon Stewart

  • Trad Bowhunter
  • **
  • Posts: 2567
Re: Grizzly Makeover
« Reply #3 on: October 30, 2009, 08:40:00 AM »
Beautiful looking bow.  what wipe-on poly did you use for the finish and how many coats?

Offline bctgrad

  • Trad Bowhunter
  • **
  • Posts: 137
Re: Grizzly Makeover
« Reply #4 on: October 30, 2009, 08:50:00 AM »
I used Minwax Wipe-On poly (gloss) and stopped at 6 coats.  This was the first time that I've used the wipe-on stuff and found out that it really runs if you put it on too heavy.  I had to sand off several runs in the riser and re-apply.  I guess you need to keep the coats pretty thin and watch the edges for drips.

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Grizzly Makeover
« Reply #5 on: October 30, 2009, 10:00:00 AM »
looks better then new outstanding work.bd

Offline highlife

  • Trad Bowhunter
  • **
  • Posts: 173
Re: Grizzly Makeover
« Reply #6 on: October 30, 2009, 10:50:00 AM »
I've never liked factory camo paint .... natural wood in my opinion is the best camo of all.

Great job.
There's something about holding a longbow in your hand!

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: Grizzly Makeover
« Reply #7 on: October 30, 2009, 10:54:00 AM »
:thumbsup:

Offline OldSkoolArcher

  • Trad Bowhunter
  • **
  • Posts: 791
Re: Grizzly Makeover
« Reply #8 on: October 30, 2009, 11:18:00 AM »
I have a factory camo grizz on the way, depending on the condition of the camo I might follow suit.

Offline Hoof

  • Trad Bowhunter
  • **
  • Posts: 99
Re: Grizzly Makeover
« Reply #9 on: October 30, 2009, 12:12:00 PM »
Sweet Brian! lots of pretty grain hidden away there...Great Job!

Offline Al H

  • Trad Bowhunter
  • **
  • Posts: 60
Re: Grizzly Makeover
« Reply #10 on: October 30, 2009, 12:16:00 PM »
Beautiful bow there Brian.  She really looks sweet.  Love the natural wood.  :thumbsup:
Al's Decals

Offline yellow bow

  • Trad Bowhunter
  • **
  • Posts: 2097
Re: Grizzly Makeover
« Reply #11 on: October 30, 2009, 07:37:00 PM »
:thumbsup:

Offline bowhunterfrompast

  • Trad Bowhunter
  • **
  • Posts: 2768
Re: Grizzly Makeover
« Reply #12 on: October 30, 2009, 08:23:00 PM »
Brian...you turned that beast into a beauty  :thumbsup:
Rick Wakeman
UBM Lifetime Member
American Broadhead Collectors Club

Offline KENDALL TECHAU

  • Trad Bowhunter
  • **
  • Posts: 215
Re: Grizzly Makeover
« Reply #13 on: November 02, 2009, 05:09:00 PM »
Really nice work Brian !!  :thumbsup:    :thumbsup:

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©