INFO: Trad Archery for Bowhunters



Author Topic: bear razorhead?  (Read 502 times)

Offline NIGEL01

  • Trad Bowhunter
  • **
  • Posts: 705
bear razorhead?
« on: January 24, 2010, 05:08:00 PM »
Could someone fill me in as to why Razorheads are no longer produced?  I have 8 or so I was going to try this year, the screw in ones.  they fly good for me and I can get them nice and sharp.

Offline elbow

  • Trad Bowhunter
  • **
  • Posts: 237
Re: bear razorhead?
« Reply #1 on: January 24, 2010, 08:57:00 PM »
Dont know but I used them this year and killed two deer with them, a doe in VT and a 7pt in Ohio, love em!

Offline Grant Young

  • Trad Bowhunter
  • **
  • Posts: 1049
Re: bear razorhead?
« Reply #2 on: January 26, 2010, 10:47:00 AM »
Nigel- I've used Razorheads for over forty years. Until just recently heads of similar but different designs were still being produced under the Razorhead trademark but the old so-called "greenies" were discontinued around thirty years ago and replaced with a stainless model and then yet another stainless model shortly thereafter- each was called a Super Razorhead but most of the faithful felt they were something less than "super" compared to the originals carbon steel heads. The Bear Archery that produced the early Razorheads hasn't been the same Bear Archery for many years and the catalogue of items produced and marketed by the company (whoever it was owned by at a given time) has grown progressively smaller, especially as it applies to traditional gear. Don't worry though, if you like them there are literally millions of them out there. I expect to use them til I can no longer hunt and I'm nowhere near hanging it up.    Grant

Offline Tim Hoeck

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 237
Re: bear razorhead?
« Reply #3 on: January 26, 2010, 04:00:00 PM »
Where can I find about 5 dozen of the bleeder blades for them ??

Offline NIGEL01

  • Trad Bowhunter
  • **
  • Posts: 705
Re: bear razorhead?
« Reply #4 on: January 29, 2010, 11:07:00 AM »
Thanks, for the info Grant.  I just got done watching the full Fred Bear video collection I bought from 3 Rivers.  Was wondering what ever happened to Fred's "monster" he used to produce the Razorheads?

Offline Hud

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2242
  • 360-921-5779
Re: bear razorhead?
« Reply #5 on: January 29, 2010, 05:21:00 PM »
Great post by Grant, he is right on.

The original Bear Razorheads are good and I still use them. The carbon steel sharpens better than the stainless, in my opinion.

However, there are a number of heads on the market, stronger than the earlier Bear heads which are getting pricey online. You may find some information on heads by doing a search on TG.
TGMM Family of the Bow

Offline chad graham

  • Trad Bowhunter
  • **
  • Posts: 286
Re: bear razorhead?
« Reply #6 on: January 29, 2010, 05:25:00 PM »
tim hoek,i should have some extra bleeders not sure how many i will look pm me i can send you some, chad

Offline Tim Hoeck

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 237
Re: bear razorhead?
« Reply #7 on: January 29, 2010, 11:02:00 PM »
Chad sent you a PM

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©