INFO: Trad Archery for Bowhunters



Author Topic: Refinishing Magnesium Risers  (Read 444 times)

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Refinishing Magnesium Risers
« on: January 26, 2010, 11:23:00 PM »
I'm sure this has been gone over before but I couldn't find it in a search.I am refinishing a Bear "A" mag riser,1972 vintage that has been stripped to bare metal.Do you pros have a recommendation for primer and paint?

Offline lesaint45

  • Trad Bowhunter
  • **
  • Posts: 25
Re: Refinishing Magnesium Risers
« Reply #1 on: January 27, 2010, 12:34:00 AM »
Are you using spray equipment or a rattle can? Either way look to the local Auto Body supply for a self etching primer that does not need to be sanded unless you have defects to fill. You can use many different types of topcoat. Keep in mind that most are harmfull and require a respirator. Use a single stage type not base coat clear coat for ease of application. Above all follow the advice on the tip sheet from the manafacture.
LS

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: Refinishing Magnesium Risers
« Reply #2 on: January 28, 2010, 11:14:00 AM »
Thanks for your advice.I'll look into that.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©