INFO: Trad Archery for Bowhunters



Author Topic: Need information on a Bear Bearcat...  (Read 556 times)

Offline joaxe

  • Trad Bowhunter
  • **
  • Posts: 7
Need information on a Bear Bearcat...
« on: May 14, 2010, 11:44:00 AM »
Trad Gang peeps,

I am going to be looking at a Bear Bearcat "Glass powered" 45# recurve this afternoon. I need to check it for any possible damage. The seller (private, not **** or anything) is looking for $85 for it. Just wondering if it is worth it. I know the Bearcats were made between 1964-1971 in Grayling, MI.

Thoughts? And what exactly should I be looking for in terms of any damage or problems?

Thanks, peeps!

Joe

Offline Blackhawk

  • Trad Bowhunter
  • **
  • Posts: 3863
Re: Need information on a Bear Bearcat...
« Reply #1 on: May 14, 2010, 06:50:00 PM »
Drilled holes turn me off, but should not affect the bow's integrity.  

A slight twisted limb is no big thing to correct, so do not let that bother you too much.  Stress lines/cracks is common, but if not too deep or lifing up, OK.  

I mainly look for delaminations, tip damage, and overall appearance (which could show signs of abuse).  Use a stringer to string it and gently flex the limbs a few times, and eventually get to full draw.  

Price asked is fair, but no bargain, even though the Bearcats are pretty good shooters.
Lon Scott

Offline D.Sheppard

  • Trad Bowhunter
  • **
  • Posts: 519
Re: Need information on a Bear Bearcat...
« Reply #2 on: May 15, 2010, 10:27:00 AM »
Those Bear Bearcats may be on the lower end of Bear line of bows but as well as being a decent shooter if you search a little you can find some beauties.

(left,right)) 1964 - 42# and a 1966 - 38#

 
"We're just a bunch of part time amateur hunters giving chase to full time professional animals."

Offline Hoof

  • Trad Bowhunter
  • **
  • Posts: 99
Re: Need information on a Bear Bearcat...
« Reply #3 on: May 15, 2010, 03:59:00 PM »
Sharpe looking set right there Don!   :thumbsup:

Offline joaxe

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Need information on a Bear Bearcat...
« Reply #4 on: May 16, 2010, 08:51:00 PM »
Trad Gang peeps,

Well...I pulled the trigger and bought the Bearcat.  I checked the limbs for any twisting and ran cotton balls over them for any splintering/delamination.  I even shot a few arrows through it. All is good...and I haggled it down to $70!

Thanks for the replies on this one everybody!

Joe

Offline D.Sheppard

  • Trad Bowhunter
  • **
  • Posts: 519
Re: Need information on a Bear Bearcat...
« Reply #5 on: May 16, 2010, 08:56:00 PM »
We will need pics ASAP
"We're just a bunch of part time amateur hunters giving chase to full time professional animals."

Offline joaxe

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Need information on a Bear Bearcat...
« Reply #6 on: May 16, 2010, 09:03:00 PM »
Trad Gang peeps,

Here are some pics (hopes this works...1st time doing it).

Joe

 

 

 

 

 

Offline joaxe

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Need information on a Bear Bearcat...
« Reply #7 on: May 16, 2010, 09:04:00 PM »
Hey...how can I get pics to work in a post?

Joe


Offline Jack Shanks

  • Trad Bowhunter
  • **
  • Posts: 1413
Re: Need information on a Bear Bearcat...
« Reply #9 on: May 16, 2010, 09:42:00 PM »
Bearcat & Black cat

Your Bearcat is a 69. Can't tell about the Black cat.
Jack Shanks

Offline joaxe

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Need information on a Bear Bearcat...
« Reply #10 on: May 16, 2010, 09:42:00 PM »
Or this....?

 

 

 

 

 

 

...and to think that I am a network engineer! Just had to RTFM on posting on the forum.

  :laughing:  

Joe

Offline joaxe

  • Trad Bowhunter
  • **
  • Posts: 7
Re: Need information on a Bear Bearcat...
« Reply #11 on: May 16, 2010, 09:45:00 PM »
Jack,

Yeah, 1969 from the  first digit in the S/N. Thanks and BTW, the cat is a "2005" model.

 :)

Thanks again, everybody!

Joe

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©