INFO: Trad Archery for Bowhunters



Author Topic: Bear Green stripe riser  (Read 492 times)

Offline huntnfool62

  • Trad Bowhunter
  • **
  • Posts: 59
Bear Green stripe riser
« on: August 23, 2010, 08:55:00 PM »
I would like to get a bear green stripe riser but I dont know what one would cost . I know the old addage "its worth what someone is willing to pay " but could someone give me a ballpark figure on what I should expect to pay for one in very good to excellent cond ?
Thanks
Huntnfool

Offline Tatersalad

  • Trad Bowhunter
  • **
  • Posts: 328
Re: Bear Green stripe riser
« Reply #1 on: August 23, 2010, 09:33:00 PM »
expect to pay $400-500 for just the riser.

Michael

Offline stagetek

  • Trad Bowhunter
  • **
  • Posts: 1741
Re: Bear Green stripe riser
« Reply #2 on: August 23, 2010, 10:21:00 PM »
I bought one for $320.00 a few months ago. That was e-Bay. I thought I got a good deal. That did not include limbs.

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Bear Green stripe riser
« Reply #3 on: August 23, 2010, 10:23:00 PM »
What Michael said, and then the condition comes into it.  There will be a difference between one the is in say "mint condition" and one that has been "rode hard and put up wet".

Next is the weight of the green tip limbsm and the condition.  Ultra light or ultra high weights are hard to come by.  Limbs from 50 to 60# are about the average.

Past that there are a few other considerations such as if it was signed by Fred Bear, Frank Scott, or some others.  A good signature can really push the price up.  I had one at one time that had gold clamps.  It was a very uncommon one that you just don't see every day.

I just sold a signed one to a guy with 55# limbs, and traded an unsigned one with 70# limbs to another guy.

One thing you can do is go to e8ay and search for one in the completed items section to see what they have sold for.

Are they worth it as shooters?  Go see what a new Bear  custom takedown is going for nowadays.

Hope this helps a bit, although I did not give you an exact answer.

I guess, bottem line is, "what is it worth to you"?
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline huntnfool62

  • Trad Bowhunter
  • **
  • Posts: 59
Re: Bear Green stripe riser
« Reply #4 on: August 24, 2010, 06:18:00 AM »
Thanks for the  Info ! Ihave a set of green tip limbs already 50 # I heard alot of people refer to them as dogs. Call me crazy but I think that they should be teamed up with the proper riser . There is one on the auction site claimed to be NOS in wrapper but the guy whats buy now of 650+. I think "for myself" thats high

huntnfool62

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Bear Green stripe riser
« Reply #5 on: August 24, 2010, 08:50:00 AM »
If it is in Brand new condition, that may be a realistic price considering "collectors value".  What you want is a shooter.  Bide your time and you can find one in leass than perfect condition at a lower price.

Send the quy a message asking if he will take lower if it does not sell.  Ya never know.
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Bear Green stripe riser
« Reply #6 on: August 24, 2010, 09:04:00 AM »
green tips were built for and should have if you need the speed a FF string.That may be one reason some folks call them dogs.FF makes a bit more noise then a flemish string will on green tips but braced at 7 1/4- 7 1/2 they will gain 4-8 FPS with low brace and FF bd

Offline huntnfool62

  • Trad Bowhunter
  • **
  • Posts: 59
Re: Bear Green stripe riser
« Reply #7 on: August 24, 2010, 10:10:00 AM »
I double checked my limbs and they are actually 60# not 50 as I stated earlier I bought them to use with my early 90's riser but they wont seat right , the hole doesnt match the screw because they are a little wider and longer than my early 90's limbs . I just felt it would be better  to match them with the correct year riser . Thanks for the info Doc I would never have believed the green tips were fast flight limbs . but 4-8 fps is not a lot of gain for the trade off ,"just my opinion "

Huntnfool

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Bear Green stripe riser
« Reply #8 on: August 24, 2010, 06:00:00 PM »
Learn something every day.  I did not know green tips were fastflight compatible.

Matter of fact, I thought the green tips came out in the early 80's (I think) and there was no such thing as fastflight strings (again...I think)  :dunno:
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline johnnyrazorhead

  • Trad Bowhunter
  • **
  • Posts: 959
Re: Bear Green stripe riser
« Reply #9 on: August 24, 2010, 09:38:00 PM »
I recently paid $600.00 for a green-stripe riser in the original box with paperwork.No limbs.The riser is literally "mint" and looks like it was never shot.Beautiful coloring too.It was a bit more than I had hoped to pay for one,but I believe their value has gone up a bit over the years.As others have said,check the prices on a brand new one.I don't think they're anywhere near as pretty as an early green striper,IMHO.Considering the condition of mine,in the original box,I am happy with it.I put my new set of Rose Oak/Brandon Stahl limbs on it and boy is it pretty.Another plus is that the riser section is slimmed down quite a bit from the early Grayling risers and the arrow shelf is much lower,more like Fred Bear's personal bow.They really feel good in the hand,again just my opinion.Good luck in your search.

Offline lesaint45

  • Trad Bowhunter
  • **
  • Posts: 25
Re: Bear Green stripe riser
« Reply #10 on: August 26, 2010, 09:15:00 PM »
I was reading the input from Bowdoc. I just want to say he is right on as I hunt with him and use FF on my green tips 55#. You see what he is saying is that the limbs have a hard future wood laminate tip that is like iron. The core is maple not fast core. I would like to add that there are 3 types of Green tip limbs and they are not all the same. 1. Marcata wedge maple core tapered
2. Marcata wedge maple core parallel
3. Wood wedge(matches the tiger riseer) maple core stained
 Having the correct riser also helps as they are not all the same either, this is why some limbs fit well others do not.

Offline OldSkoolArcher

  • Trad Bowhunter
  • **
  • Posts: 791
Re: Bear Green stripe riser
« Reply #11 on: August 26, 2010, 09:23:00 PM »
lesaint,
  Which one of the three are you using?

Thanks!

Offline lesaint45

  • Trad Bowhunter
  • **
  • Posts: 25
Re: Bear Green stripe riser
« Reply #12 on: August 26, 2010, 10:57:00 PM »
I use the early green stripe ( multi color maple riser early 80's) and the first set of green tips maple core tapered.

Offline huntnfool62

  • Trad Bowhunter
  • **
  • Posts: 59
Re: Bear Green stripe riser
« Reply #13 on: August 27, 2010, 08:45:00 PM »
Thanks for everyones Input! I found a green stripe to buy, will have to pay more than I was expecting . but thats why I started the thread,  to see if what I was expecting  to pay was realistic.
Thanks Again for everyones help
Huntnfool

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©