INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Aluminum inserts for #11s??  (Read 340 times)

Offline kuch

  • Trad Bowhunter
  • **
  • Posts: 781
Aluminum inserts for #11s??
« on: January 22, 2011, 04:00:00 PM »
What size Aluminum inserts would fit #11 shafts? Thnks.
Logged

Offline kuch

  • Trad Bowhunter
  • **
  • Posts: 781
Re: Aluminum inserts for #11s??
« Reply #1 on: January 22, 2011, 06:29:00 PM »
wanted to use screw in FP and BH to make it easier
Logged

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Aluminum inserts for #11s??
« Reply #2 on: January 22, 2011, 10:13:00 PM »
Well Chad, My MJ LOG #11 shafts have no markings on the inserts. And the inserts for my microflights are glued in. But it seems that I "machined" some down,just cant remember what size. I chucked them in a drill motor and wore them down a bit. works good if you go slow.
Wish I was more help for you.
Chuck
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline kuch

  • Trad Bowhunter
  • **
  • Posts: 781
Re: Aluminum inserts for #11s??
« Reply #3 on: January 23, 2011, 01:32:00 PM »
Thanks Chuck. Just wondered if someone knew what Aluminum size would fit instead of guessing.I'll probably just take a shaft in to the archery shop and go thru their stash.
Logged

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Aluminum inserts for #11s??
« Reply #4 on: January 24, 2011, 06:50:00 AM »
Thats what I did. Have fun.
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline bearmagtd

  • Trad Bowhunter
  • **
  • Posts: 81
Re: Aluminum inserts for #11s??
« Reply #5 on: February 03, 2011, 06:14:00 PM »
2117 is just a little to big, but is about right to cover to the out side of the shaft also.
Logged

Offline kuch

  • Trad Bowhunter
  • **
  • Posts: 781
Re: Aluminum inserts for #11s??
« Reply #6 on: February 03, 2011, 08:19:00 PM »
yeah , i haven't got around to sand the 2117 to fit. the local shop was zero help.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©