Author Topic: Bear takedown case black with gold med. (Read 834 times)

Kip · « **on:** December 10, 2013, 10:45:00 AM »

Someone sent me one of the black zippered case.The liner was gone so I cleaned the residue and want to put some more foam.How thick was it and were their any cutouts in the orginal.The case is thin and made for a mag takedown I believe.I have a mag riser A-size that I just painted.Any info would help.Thanks in advance

PAPALAPIN · « **Reply #1 on:** December 10, 2013, 11:49:00 AM »

Don't know exactly, but there was a thin strip about 1/4" on the bottom, then the middle with the cutout was about as think as the riser and limbs. The top layer was as thick as the first.

papabear08 · « **Reply #2 on:** December 10, 2013, 02:55:00 PM »

Most folks I know and myself who have and use these cases line them with carpet. In fact I have seven most of which came with wooden handles and came from other collectors are all set up that way.

Kip · « **Reply #3 on:** December 11, 2013, 07:10:00 AM »

Thanks for the help. I had not thought about carpet good idea.Kip

inrut · « **Reply #4 on:** December 12, 2013, 05:08:00 PM »

This is what I used in mine. I'm very pleased with it. I used spray adhesive to hold it in place.

http://www.grainger.com/product/Foam-Sheet-5GCU4?s_pp=false

News:

Author Topic: Bear takedown case black with gold med. (Read 834 times)

Kip

Bear takedown case black with gold med.

PAPALAPIN

Re: Bear takedown case black with gold med.

papabear08

Re: Bear takedown case black with gold med.

Kip

Re: Bear takedown case black with gold med.

inrut

Re: Bear takedown case black with gold med.

Users currently browsing this topic: