INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Kodiak and spring arm quiver  (Read 1013 times)

Offline NW Jamie

  • Trad Bowhunter
  • **
  • Posts: 175
Kodiak and spring arm quiver
« on: May 30, 2014, 11:16:00 AM »
I have a spring arm quiver that fits on my 69 Kodiak Hunter. Over the years I have been reluctant to put it on as it seems to mar the finish on the limbs. Well and then there is the fact that it seems to make a lot of noise. The noise aside, would using it on the bow hurt the bow over a period of time?
Logged
Regard’s,
Jim

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: Kodiak and spring arm quiver
« Reply #1 on: May 30, 2014, 12:57:00 PM »
It won't 'hurt' the bow but it will 'hurt' the finish as you observed, and then there is the noise factor because the fit is not perfect. The newer strap on quivers, while not period correct, work much better.
Logged

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Kodiak and spring arm quiver
« Reply #2 on: May 30, 2014, 12:58:00 PM »
It will mar the finish, but it should not hurt the bow.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline jackdaw

  • Trad Bowhunter
  • **
  • Posts: 1138
Re: Kodiak and spring arm quiver
« Reply #3 on: May 30, 2014, 08:55:00 PM »
When using a double spring arm quiver I put two loops of electrical tape around  the hooks of the quiver... I had no appreciable Marks on my finish and the bow was very quiet with it on...
Logged
John Getz:........... Time flies like an arrow, Fruit flies like bananas.
Ed HOLCOMB 59' KODIAK 51#
Ed HOLCOMB 59' KODIAK 47#
67'1/2  BEAR SUPER K  44#
WILSON BROTHERS BLACK WIDOW 60" 45#
LONGRIVER ELK 62" LONGBOW 53#
1967 WING 62" SLIMLINE 43#

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: Kodiak and spring arm quiver
« Reply #4 on: May 31, 2014, 07:25:00 PM »
You can quiet those down.I used to put a small wrap of moleskin on the wires that came into contact with each other,put blue Loctite on all screws and filled the gap between the two aluminum plates that attach the gripper to the wire frame.
Logged

Offline hogless

  • Trad Bowhunter
  • **
  • Posts: 183
Re: Kodiak and spring arm quiver
« Reply #5 on: June 04, 2014, 08:43:00 AM »
I slide two pieces of bike tube down the limbs where the hooks attach and put mole skin on contact points on wire
Logged

Offline stagetek

  • Trad Bowhunter
  • **
  • Posts: 1748
Re: Kodiak and spring arm quiver
« Reply #6 on: June 08, 2014, 10:42:00 AM »
I wrap the brackets that contact the bow with fleece mole-skin. It sticks fine, quiets them and protects the finish.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©