INFO: Trad Archery for Bowhunters



Author Topic: Thin Overlay Material  (Read 1018 times)

Offline warpedarrow

  • Trad Bowhunter
  • **
  • Posts: 475
Thin Overlay Material
« on: October 21, 2014, 07:58:00 AM »
The 1957 Kodiak Special arrived yesterday.  Excellent condition for any bow and especially for a 57 year old one.
One of the micarta tip overlays is missing so I will retip the bow.  The remaing overlay is a combination of brown, red, and white material.  It has five or six layers. This stuff is thin!  The red is not much thicker than a fingernail.

Does anyone know where I might find some material that is thin? The stuff that the bow building suppliers sell is way too thick for this job.
Brad Lehmann

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Thin Overlay Material
« Reply #1 on: October 21, 2014, 09:26:00 AM »
Sometimes the free samples of countertop materials at the home improvement stores can be used. Lots of colors and materials available free.

Offline Robert Marvin

  • Trad Bowhunter
  • **
  • Posts: 95
Re: Thin Overlay Material
« Reply #2 on: October 21, 2014, 10:46:00 AM »
.030 core tuff maybe someone has some scraps

Offline warpedarrow

  • Trad Bowhunter
  • **
  • Posts: 475
Re: Thin Overlay Material
« Reply #3 on: October 21, 2014, 09:15:00 PM »
I never thought about  countertop laminate.  I thought that the color was surface only on that stuff.  At least the pieces of it that I have seen that were broken had an ugly brown base to them.

I will see about getting some information about the thin core tuff.
Brad Lehmann

Offline Pack animal

  • Trad Bowhunter
  • **
  • Posts: 171
Re: Thin Overlay Material
« Reply #4 on: October 22, 2014, 05:02:00 PM »
Hello I used heavy construction paper and epoxy
tho I did not quite get the color correct.
But the layered effect came through pretty good.
 

Offline Pack animal

  • Trad Bowhunter
  • **
  • Posts: 171
Re: Thin Overlay Material
« Reply #5 on: October 22, 2014, 05:04:00 PM »
The one on the left is the new one I created.  The tip on the right is from another bow

Offline woodchucker

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5427
Re: Thin Overlay Material
« Reply #6 on: October 22, 2014, 06:42:00 PM »
Few years ago, I had a 1956 that I ended up giving to Stickshooter's wife, Shell. It was missing a tip overlay, and searching around here, I found out the original tip overlays were made of carboard.

She was going to get the bow refinished by BowDoc, last I heard.....
I only shoot WOOD arrows... My kid makes them, fast as I can break them!

There is a fine line between Hunting, & Sitting there looking Stupid...

May The Great Spirit Guide Your Arrows..... Happy Hunting!!!

Offline Robert Marvin

  • Trad Bowhunter
  • **
  • Posts: 95
Re: Thin Overlay Material
« Reply #7 on: October 23, 2014, 11:33:00 AM »
unless you want it circa its best to use glass of some kind for durability-like glass tipping a 59 kodiak

Offline warpedarrow

  • Trad Bowhunter
  • **
  • Posts: 475
Re: Thin Overlay Material
« Reply #8 on: October 23, 2014, 06:12:00 PM »
I started doing some research on knife scales which are very similar to micarta.  It looks pretty easy to make so I will play with it a bit.  Construction paper, linen, and other things can be used to make it.

I will go with paper on this bow because it is so nice already that I don't want any "customizing" done to it.  The beat up old 59 that I restored got fiberglass tips put on it.
Brad Lehmann

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©