INFO: Trad Archery for Bowhunters



Author Topic: Vintage Recurve Identification and Questions  (Read 3370 times)

Offline Valkyra68

  • Trad Bowhunter
  • **
  • Posts: 5
Vintage Recurve Identification and Questions
« on: January 11, 2018, 01:50:00 AM »
Hello Archery lovers,
Rookie here with some questions about my bow. The only markings are the ones shown and there is very little on the internet that I can find about Indian bows. I think it’s “vintage” but not worth very much?

1. Does anyone know what kind of bow this is and what it’s made of?
2. Does anyone know when it was made?
3. Correct me if I’m wrong but why does it seem vintage bows aren’t worth very much? Is it because they are of inferior quality, or because the demand is low?
I’m not selling this bow but I’d still like to get some opinions.
       
Fast is Fine but Accuracy is Final~
A gentleman is simply a patient wolf~
Power is nothing without control~

Offline Valkyra68

  • Trad Bowhunter
  • **
  • Posts: 5
Re: Vintage Recurve Identification and Questions
« Reply #1 on: January 11, 2018, 01:54:00 AM »
Well I don’t know why it didn’t post the pictures ☹️
 
 
Fast is Fine but Accuracy is Final~
A gentleman is simply a patient wolf~
Power is nothing without control~

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Vintage Recurve Identification and Questions
« Reply #2 on: January 11, 2018, 10:20:00 AM »
Your bow was made in the 1960's. The lighter wood in the handle is Maple. Not sure about the darker wood. Indian made a lot of different models. If I knew the length of the bow I could narrow it down. Yours is stamped with an S which means it was a second. It will have a minor blemish most likely to the fiberglass. Some of the hunting and competition models bring decent prices and others not so much.

Offline Valkyra68

  • Trad Bowhunter
  • **
  • Posts: 5
Re: Vintage Recurve Identification and Questions
« Reply #3 on: January 11, 2018, 11:04:00 AM »
Thanks Wadde,
It’s a 60’ I didn’t think this was too bad of a bow until I bought my Predator...but I’m keeping it for when my kids get up to a #45. I also have a couple Bear Kodiaks that are just beautiful to shoot. Again- thanks for the info!
Fast is Fine but Accuracy is Final~
A gentleman is simply a patient wolf~
Power is nothing without control~

Offline Valkyra68

  • Trad Bowhunter
  • **
  • Posts: 5
Re: Vintage Recurve Identification and Questions
« Reply #4 on: January 11, 2018, 11:16:00 AM »
Shoot I lied. I haven’t even taken it out on so long I think it’s longer than my 68”  but hard to tell because it’s so straight
Fast is Fine but Accuracy is Final~
A gentleman is simply a patient wolf~
Power is nothing without control~

Offline zepnut

  • Trad Bowhunter
  • **
  • Posts: 530
Re: Vintage Recurve Identification and Questions
« Reply #5 on: January 11, 2018, 07:25:00 PM »
I believe the darker wood is walnut.

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Vintage Recurve Identification and Questions
« Reply #6 on: January 11, 2018, 10:16:00 PM »
It is probably 66" Two models made in the 60's that were 66" with white glass were the Iroquois and the Sioux. The Iroquois had rosewoods in the handle so I would lean toward Sioux.

Offline mahantango

  • Trad Bowhunter
  • **
  • Posts: 1384
Re: Vintage Recurve Identification and Questions
« Reply #7 on: January 16, 2018, 05:49:00 PM »
I was thinking the Cochise.
We are all here because we are not all there.

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Vintage Recurve Identification and Questions
« Reply #8 on: January 17, 2018, 09:41:00 AM »
The Cochise was a 56 inch bow with dark fiberglass.It was considered a beginners bow at the time.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©