Author Topic: DAN Quallan brace height? (Read 410 times)

elkbow · « **on:** December 31, 2007, 05:16:00 PM »

a buddy bought a dan quillan patriot and he was wandering about the brace height,62in,49lb at 28"

Red4arm · « **Reply #1 on:** December 31, 2007, 05:29:00 PM »

I have a 62" patriot 59lb @28 .. I shoot 7 in brace height .. not sure if its the recommended but it shoots best there for me.

joe skipp · « **Reply #2 on:** December 31, 2007, 09:25:00 PM »

Minimum 6" to 6 7/8"....that seemed to be the sweet spot for the few I sold here. Good bow...

elkbow · « **Reply #3 on:** December 31, 2007, 10:17:00 PM »

thank you gentlemen,he was told when he bought it that it was 6in but it just seemed low.thank you again!

Tradesmen4 · « **Reply #4 on:** January 01, 2008, 08:34:00 AM »

I have a canebrake and patriot. The sweet spot for canebrake is close to 6 and the patriot is between 6.5 and7.75 hope this helps. Greg

elkbow · « **Reply #5 on:** January 01, 2008, 08:53:00 AM »

thanks Tradesmen4,that bow shoots,i was very impressed with its performance.

longstiks · « **Reply #6 on:** January 01, 2008, 10:05:00 AM »

I Talked with Dan when I bought one of his bows and he said I could go down to 6" with a FF string.
Denny

News:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS